API Reg DTH Drill Pipe Hdd Drill Rod For Blast Hole Drilling 1000mm
- 9000mm
Description of API Reg DTH Drill Pipe DTH Drill Rod For Blast Hole
Drilling1000mm ~ 9000mm
DTH Drill rod is made of high quality material detected by
spectrograph, impact and tension test.
With fully digitized processing line introduced from Japan with
integral heat treatment equipment
Anti adhesion thread with nitrogen treatment on surface make it
easier for handling.
Metallography detection, hardness test, magnaflux inspection,
ultrasonic flaw detection, tensile test and impact test ensure
products quality.
Length: 1, 000mm ~ 9, 000mm;
Diameter: 76mm (3") ~ 146mm (5-3/4");
Wall Thickness: 5.5mm ~ 8mm;
Connection Thread: 2 3/8", 2-7/8", 3-1/2", 4 1/2" API Reg. Or API
IF Thread.
Raw materials:
We choose the best steel tubes in the market to manufacture our
rods and pipes. Spot check will be conducted after the steel tubes
delivered to company. We will make sure the compositions and
specifications match the inspection report form the suppliers.
Thread opening process:
Accuracy of threads will determine the use effects and life time of
drill rod and casings.
CNC latches and form cutter are used in thread opening processing
to minimize error made by anthropic factors.
Specifications of API Reg DTH Drill Pipe DTH Drill Rod For Blast
Hole Drilling1000mm ~ 9000mm
| uter diameter |
Thread |
Wall thickness
mm |
Length
mm |
| mm | inch |
| 76 | 3 | API 2 3/8 REG
API 2 7/8 REG
API 3 1/2 REG
API 4 1/2 REG
API 2 3/8 IF
API 2 7/8 IF
API 3 1/2 IF
API 4 1/2 IF
BECO 3 1/2" | 4.0
6.3 | 1000-6000 |
| 89 | 3 1/2 | 4.0
6.3
8.8 | 1000-6000 |
| 102 | 4 | 6.3
8.8 | 1000-6000 |
| 114 | 4 1/2 | 6.3
12.5 | 1000-9000 |
| 127 | 5 | 6.3
12.5
19 | 1000-9000 |
| 133 | 5 1/4 | 6.3
12.5
19 | 1000-9000 |
| 140 | 5 1/2 | 8.8
12.5
19 | 1000-9000 |
| Size | Nominal mass Lb/ft | Calculated weight type | Wall thickness |
| in. | mm | lb/ft | kg/m | in. | mm |
| 2 3/8 | 60.3 | 6.65 | 6.26 | 9.32 | 0.280 | 7.11 |
| 2 7/8 | 73.0 | 10.4 | 9.72 | 14.48 | 0.362 | 9.19 |
| 3 1/2 | 88.9 | 9.50 | 8.81 | 13.12 | 0.254 | 6.45 |
| 3 1/2 | 88.9 | 13.30 | 12.31 | 18.34 | 0.368 | 9.35 |
| 3 1/2 | 88.9 | 15.50 | 14.63 | 21.79 | 0.449 | 11.40 |
| 3 1/2 | 88.9 | 15.50 | 14.63 | 21.79 | 0.449 | 11.40 |
| 4 | 101.6 | 14.00 | 12.93 | 19.26 | 0.330 | 8.38 |
| 4 1/2 | 114.3 | 13.75 | 12.24 | 18.23 | 0.271 | 6.88 |
| 4 1/2 | 114.3 | 16.60 | 14.98 | 22.31 | 0.337 | 8.56 |
| 4 1/2 | 114.3 | 20.00 | 18.69 | 27.84 | 0.430 | 10.92 |
| 5 | 127.0 | 16.25 | 14.87 | 22.15 | 0.296 | 7.52 |
| 5 | 127.0 | 19.50 | 17.93 | 26.71 | 0.362 | 9.19 |
| 5 | 127.0 | 19.50 | 17.93 | 26.71 | 0.362 | 9.19 |
| 5 | 127.0 | 25.60 | 24.03 | 35.79 | 0.500 | 12.70 |
| 5 | 127.0 | 25.60 | 24.03 | 35.79 | 0.500 | 12.70 |
| 5 1/2 | 139.7 | 21.90 | 19.81 | 29.51 | 0.361 | 9.17 |
| 5 1/2 | 139.7 | 24.70 | 22.54 | 33.57 | 0.415 | 10.54 |
Heat treatment control:
Heat treatment will greatly improve the material strength and
increase the thread wear life of the rods and casings. We conduct
either tru-wall or both ends heat treatment to the tube body. After
heat treatment, strength, hardness, straightness and concentricity
of the treated tubes will be tested in our lab.
Additional thread treatment:
Surface of the threads will be cleaned to remove burr adhered after
threads are opened.
Afterwards, the tread surface will be phosphated to improve surface
conditions.
