Technical Grade Dioctyl Phthalate Plasticizer Hydrolysis Resistant
Lightweight
Description
widely used as a plasticizer, good overall performance, and good
compatibility with polyvinyl chloride, synthetic resins, cellulose
nitrate and other rubber. is widely used in all kinds of soft PVC
plastics such as films, leather, wire, cable, molded products and
other; widely used in rubber, paints and emulsifier and other
industries, can improve resilience of products, reduce the
compression deformed, and no effect on the vulcanization of rubber.
Safety
Based on toxicity studies, it has a low order of toxicity and does
not require special handling.
Handle in accordance with good industrial hygiene and safety
practices. Avoid eye contact by wearing personal protective
equipment. If eye contact occurs,wash with flowing water and
contact physician.
Avoid repeated or prolonged skin contact. Avoid breathing vapors by
providing adequate ventilation. Always refer to the Material Safety
Data Sheet (MSDS) for detailed information on safety.
Specification
| Item | Index | | |
| Unit | Top grade | Typical factory values |
| Color(pt-co) | ≤ | 30 | 30 |
| Ester content | %≥ | 99.5 | 99.5 |
| Flash point | ℃≥ | 210 | 210 |
| Density(p20) | g/cm3 | 0.957—0.965 | 0.957—0.965 |
| Acidity | mgKOH/g≤ | 0.1 | 0.07 |
| moisture | %≤ | 0.1 | 0.08 |
Stroage
Emergency overview - Avoid contact with skin, eyes and clothing -
Avoid breathing vapor or mist - Washing thoroughly after handling -
Use only with suitably ventilation - Avoid contact with strong
oxidizers, excessive heat, sparks or open flame.
Hazardous decomposition products - Thermal decomposition may
release toxic and hazardous gases Fire and explosion hazard -
Slightly fire hazard when exposed to heat or flame and larger fires
use water spray fog or regular foam.
Stability and reactivity - Stable under normal temperature and
pressure.
Quality standard
The product meets GB/T 5761-2006 standard with its physical and
chemical properties meeting requirement in table below:
1. The user can choose any one from vifscosity number, K value
,index of average polymerizapion degree.
2. The user can confer with the manufacture if they have other
index ,requirement ,on thermal stability.
