Extruded Aluminum Motor Enclosure, Aluminum Extrusion Motor
housing, Aluminum Motor Casing
Product Description:
Aluminium water-cooled motor housing is extruded. And the cooling
water circulation in the inner lining of the shell is carried out.
Taking away the heat generated by the motor run time. This process
makes the motor housing almost no heat dissipation outside. The
water cycle replaces the cooling fan.
The research and development of aluminium extruded motor housing
have successfully replaced the motor housing in aluminium die-cast
forming. These problems that motor housing in aluminium die casting
faced that poor density of materials, easy to cause porosity,
blowholes and other casting defects will be solved and successfully
avoid the defects of poor surface casting roughness and lower
corrosion resistance.
Aluminum Extruded Motor Housing ( or Extruded Aluminium Motor
Enclosure) has a better performance than other materials:
Lightweight; Low noise; Energy saving and high efficiency, using
aluminium alloy 6063 as the material is extruded by hot extrusion.
Inner hole concentricity ≤0.07 mm.
Aluminium extruded motor housing is mainly applied to the
micromotor, environmental air conditioner motor, Water cooled air
conditioning motor, air compressor motor, negative pressure
blowers, electric motor, electro-tricycle motor, cooling tower
machine, electric power tool motor, and gear motor etc.
contact: Summer +86 15162362609
