China Low Price 12.1 Inch Maternal-Fetal Monitor For Pregnant Use
Built-In Rechargeable Lithium Battery
Features
•Module with a new high-precision, high-precision measurement
parameters, reliable quality and stable performance. High
brightness 12.1 inches and high resolution color TFT LCD, the
waveform data is clearly visible.
•Jog shuttle operation, in English logo button, easy to use, simple
and intuitive operation.
•Three-channel synchronous acquisition ECG, all leads seven-channel
synchronous ECG display.
•Multiple display interface: standards, large font, all leads,
trend charts coexist meet more clinical needs.
•All aluminum internal structure design has good shock resistance
to meet the mobile environment.
• Oxygen using the new digital technology, when making weak
perfusion and finger jitter measurements, it is more accurate.
•Detection and analysis of ST segment automatic detection,
arrhythmia analysis, analysis of drug concentrations drop table.
•The new design of full isolation floating, anti defibrillation
anti electrosurgical interference, to meet the surgery. Ward and
other harsh environments.
•NIBP double overvoltage drift control and many other technology to
ensure accurate measurement, to protect patient safety.
• Powerful storage capability, the entire fully parametric trend
chart data, ECG
•Waveform storage playback, power-down save function.
•Automatic sound and light dual alarm ,the alarm can be set upper
and lower limits.
•Fan-less design,clean, low power consumption and improve the
lifespan of the instrument.
•Lightweight and sturdy body, easy to carry, suitable for adults,
children and newborns.
•Support for wired and wireless networking capabilities, and
support online software upgrades.
•Removing the optional built-in rechargeable lithium battery, AC-DC
dual-use, lightweight, energy-saving and environmental protection.
•Can be equipped with built-in two-channel thermal array recorder,
real-time waveforms and print icon.
•Widely used in hospital departments bedside care ward, ICU/CCU,
operating room, emergency center, family custody.
•Optional wall bracket, mobile frame, visits backpack.
Technical Parameters
Fetal heart rate
Probe:nine wafer, wide beam, pulsed operation mode and high
sensitivity
Ultrasound intensity: less than 1mW/cm2
Operating frequency:1.0MHz
Signal Processing: dedicated digital signal processing unit
Maximun Audio Output Power:1.5W
Contractions pressure:10-100 pressure unit
Ultrasonic probe output
In accordance with the provisions of the international convention
in 1992,IEC1157, negative peak sound pressure of not more than 1
trillion Pa(MPa).Beam sound intensity does not exceed
20mW/cm2(mW/cm2). Sound intensity spatial peak temporal average
density of less than 100mW/cm(mW/cm2).The models sound intensity
does not exceed 1mw/cm2
Coupling agent(GEL)
Viscous water-based sets of objects. On the skin without
stimulation, no allergies. Chemically stable, inhibit bacterial
type.
ECG
Lead Select:All leads,I, II, III,aVF, aVR, aVL.V1-6 chest leads
display
Gain Select:×1, ×2, ×4, ×0.5 fourth gear
Frequency: 0.5Hz-100Hz
Comman mode signal rejection: greater than 70dB
Scanning speed: 12.5mm/s, 25mm/s,50mm/s standard three files
Heart Rate Accuracy:±5 beats/min
Calibration signal: 1mV(peak value, accuracy ±3%)
ST segment detection: Measuring range
Use Standard:ANSI/AAMI EC 13-2002 standard
Response time:1s
Alarm:sound and light alarm
Heart rate alarm range(preset value exceeds the preset alarm):
Upper limit adjustable between 1-250 times/min
The lower limit adjustable between 0-249 times/min
SPO2 oxygen saturation
Range:0-100%
Official pay Accuracy:1%
Resolution:1%
Pulse rate:20-250 beats/min
Response time:1s
Alarm:sound and light alarm
Heart rate alarm range(preset value exceeds the preset alarm):Upper
Limit:adjustable between 1%-100%
Lower Limit:adjustable between 0%-99%
RESP respiration
Respiratory frequency range:0-60 times/min
Accuracy:±1bpm
Response time:1s
Gain selection:×1, ×2, ×4, ×0.5 fourth gear
Alarm:sound and light alarm
Alarm preset range (above the preset alarm value) Upper
limit:adjustable between a 10-100beats/min
Lower limit:adjustable between 0-99 times/min
NIBP blood pressure
Technology: Oscillometric
Measuring method: positive and negative two-way measurement data is
more accurate
Operating modes:manual/automatic
Units of measurement:mmHg/Kpa
Overvoltage protection:double protection
Measurement time:less than 45s
Cuff pressure range:0-250mmHg
Blood pressure measurement accuracy:ANS/AAMI sp10-2002 standard
error of the mean and standard deviation values
Initial inflatable cuff: 180mmHg(newborn children 120mmHg 70mmHg)
Follow inflatable cuff:original+30mmHg systolic blood pressure
measurement range:systolic:60-250mmHg
DBP:40-220mmHq
Average pressure:45-235mmHq
Response time:1s
Alarm:sound and light alarm:(Alarm preset range exceeds the preset
alarm value) Systolic blood pressure limit is adjustable between
1-255mmHg
Adjustable between a lower 0-254mmHq
Diastolic blood pressure limit is adjustable between 1-255mmHg
Adjustable between a lower 0-254mmHq
Use standard:ANSI/AAMA SP10-2002 standard
TEMP
Technical:highly sensitive thermistor probe
Temperature measurement range:20℃-45℃
Resolution:0.1%
Temperature accuracy:±1℃
Response time:1s
Alarm:sound and light alarm
Alarm preset range(above the preset alarm value)
Limit:adjustable between 20.1℃-45.5℃
Limit:adjustable between 20℃-45.4℃
Standard configuration:
PM-9000E maternal fetal monitor×1 set,
build-in dual channel thermal printer×1 set,
triple fetal probe×1 set,
ultrasound gel×1 bottom,
probe bandages×1 set,
standard 5-leads ECG conductance joint connecting cables×1 set,
standard adult blood pressure cuffs×1 set,
adult SPO2 probe×1 set,
TEMP probe×1 set,
power plug line×1 set,
grounding wire×1 set,
English operation manual×1 set.
Three certificates×1 set.
