Description:
It is used to determine the compression strengh, shearing strengh,
bending strengh and tensile strengh of the moulding sand.
It is also used to determine the strengh of ceramics, cement and so
on.
| Max testing force | 3000-10000N |
| compression strengh | 0-1.5MPa, 0-3MPa |
| tensile strengh | 0-6MPa, 0-12MPa |
| shearing strengh | 0-1.2MPa, 0-2.4MPa |
| bending strengh | 0-60MPa, 0-120MPa |
| display accuracy | ±1.5%FS |
| rated power | 500W |
| power source | AC220V/50Hz |
main specifications
Max testing force 3000-10000N
compression strengh 0-1.5MPa, 0-3MPa
tensile strengh 0-6MPa, 0-12MPa
shearing strengh 0-1.2MPa, 0-2.4MPa
bending strengh 0-60MPa, 0-120MPa
display accuracy ±1.5%FS
rated power 500W
power source AC220V/50Hz
Instrument features
1. It adopts special stepping motor, turbineworm reducer, linear
sliding shaft balance system
2. It is controlled by micro computer.
3. It can load and unload automatically and uniformly.
4. It has these functions, such as saving data, power failure
protection, printing...
main applications
It is widely used in foundry, machinery, casting, qualitative
inspection, scientific research, university lab....
