Truck Propeller Shaft Drive rubber Support FOTON Center Bearing

Truck Propeller Shaft Drive rubber Support FOTON Center Bearing

Truck Propeller Shaft Drive rubber Support Center Bearing for FOTON Chinese factory high quality made in China

If the needle rollers of needle roller bearings are worn, broken, dented, missing, etc., they should be replaced.
When the bearing oil seal is aged (hardened) and loses its sealing effect, it should be replaced.
If the cross shaft journal has defects such as metal peeling, wear marks, pits, and the shaft journal is seriously worn, it can be repaired by chrome plating, surfacing welding, etc. or replaced; if the cross shaft is cracked, it should be replaced.
Check For the coordination of the drive shaft spline and the keyway, hold the drive shaft sleeve fork with your hand, and use the other hand to rotate the drive shaft assembly. The amount of looseness should be within 0.3mm, otherwise it should be replaced.
When the transmission shaft sheath (also called dust cover) is damaged, it should be replaced with a new one.

Instructions for use and maintenance of drive shaft
In order to ensure the normal operation of the drive shaft and prolong its service life, attention should be paid to:
1. It is strictly forbidden for a car to start at a high gear.
2. Never lift the clutch pedal sharply.
3. It is strictly forbidden to overload and speed vehicles.
4. The working condition of the drive shaft should be checked frequently.
5. Always check the tightness of the transmission shaft hanger, whether the supporting rubber is damaged, whether each connection part of the transmission shaft is loose, and whether the transmission shaft is deformed.
6. In order to ensure the dynamic balance of the drive shaft, you should always pay attention to whether the balance pads are unsoldered. The new drive shaft assembly is provided as a complete set. When installing the new drive shaft, pay attention to the assembly mark of the telescopic sleeve and ensure that the flange fork is in a plane. When repairing and disassembling the drive shaft, the assembly mark should be printed on the telescopic sleeve and the flange shaft in order to keep the original assembly relationship unchanged during reassembly.
7. Grease should be frequently added to the universal joint cross bearing. In summer, No. 3 lithium grease should be injected, and No. 2 lithium grease in winter.

Image description:

      Guangzhou Sub-Group Auto parts Co.,Ltd was established in 2000 and is located in baiyun district, Guangzhou, China. We have China's first-class truck auto parts professional capacity and export trade capacity. We have a strong and professional auto parts research team, professional control of product quality and suitable models. We supply high quality auto parts at the most competitive prices. Since its establishment, Sub-Group Auto parts has been dedicated to the production of all kinds of plastic parts for trucks, with perfect production capacity.

      In 2008, established the foreign trade department of auto parts, mainly operating Volvo, scania, FAW, weichai, cummins, dongfeng, American and Chinese auto parts and engineering machinery parts. We have the ability to develop new products that are not in our catalog, and we will do that in a timely manner and do our best to meet customer needs. Our production and development costs are very reasonable. Please contact us according to your special needs. We are glad to cooperate with you. At the same time, our highly skilled and qualified employees are proud to be a supplier of spare parts to global customers.

       We have a strong sourcing capability in the Chinese market. We fully understand the needs of our customers. We offer high quality products, competitive prices and first class service. We hope to establish good business relations and friendship with you in the near future.

FAQ

1. who are we?
We are based in Guangdong, China, start from 2015,sell to Mid East(30.00%),Central America(20.00%),North America(10.00%),Eastern Asia(10.00%),Domestic Market(5.00%),South Asia(5.00%),Northern Europe(5.00%),South America(5.00%),Southeast Asia(5.00%),Eastern Europe(5.00%). There are total about 11-50 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?

Mercedes Benz, Man, Volvo, IVECO, DAF, SCANIA, Renault, Ford
FUSO, UD, NISSAN, HINO, ISUZU
FAW, CAMC, JAC, FOTON, DAYUN, DongFeng

CAT,CAT,Komatsu, Hyundai, Doosan, Hitachi, John Deere, Daewoo, Case, XCMG, Sany

4. why should you buy from us not from other suppliers?
1.Our company has 20 years experience in auto parts development and production. Main projects, China Heavy Truck: Weichai, FAW, Yuchai... and imported trucks: Mercedes-Benz, Volvo, MAN, Scandinavia... and construction machinery: Komatsu, Cummins, etc.

5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,CPT,DEQ,DDP,DDU,DAF,DES；
Accepted Payment Currency:USD,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German