Intelligent Automatic Systems Turnstiles 304 Stainless Steel For
Supermarkets
Flap Barrier is an upgraded products from tripod turnstile and
swing barrier. It has standard electrical interface which can be
connected with ID cards, IC cards, magnetic cards, barcode cards
etc. The integration system ensures passing in order and will never
allow unauthorized persons to go in or go out.
Specifications:
1. Power Supply: AC220V±10V ,50Hz / AC110V±10V ,60Hz
2. Power Consumption: 100W/24V
3. Temperature: -15 to 60 degrees
4. Humidity: <95%, without concretion
5. Passage Width: 550-600mm
6. Passing Speed: 30 persons/min (normal open), 20 persons/min
(normal close)
7. Arm Open/Close Time: 1s
8. Input Interface: +12V electrical signal or impulse signal with
width more than 100ms, drive current >10mA
9. Communication Interface: RS485 (Distance: <=1200m)
10. Material: Housing - 304 stainless steel
11. Dimension: 1200*300*1000mm
Arm Length: 260mm
12. Weight: 70kgs
13. Working Environment: Indoors or outdoors with shed
14. Arm Turning: Single direction or Bi-direction
Functions and Features:
1. Problem-self-checking function.
2. Many options of working ways: bi-direction card reading; one
direction card reading and another no reading; one direction card
reading and another freely. And single direction photocell
controlled passing and close. Working ways can be set in the
control panel.
3. When power off, arm open automatically and power on again, arm
will be held automatically.
4. When valid card read and passenger passed, arm can be delayed to
close from 1-60s which can be set in the control panel.
5. Auto-reposition function: After card read, passenger not pass
within regulated time period, full-height turnstile will cancel
this passing right. And the regulated time period for passing can
be set by managers.
6. If passenger pass without card read or valid card read, flap
barrier will alarm untill passenger get back from the flap barrier
and then take a valid card to be read for passing.
7. Flap barrier is with 485 interface for long-distrance control
concern.
8. Anti-rush function: if there is no open single, arm will be
holding tightly.
9. Double anti-clipping function: photocell anti-clipping and
mechanical anti-clipping.
When passenger is going through the flap barrier, photocell will
detect out this situation and will not close. After passenger
passed, arm will close automatically. During its reposition, if arm
meets any obstacle, arm will get back automatcially or stop working
for a while with very slight force. Also it will alarm.
10. Flap barrier is with standard electrical interface for the
integration of various readers and writers.
11. Flap barrier can count how many passenger has passed and will
show it in the LED display.
12. Direction display to guide passenger which direction is to go.
13. Card-reading with memory or without memory function.
14. Flap barrier can control the population inside in the control
of software.
15. Stable running with little noise.
