6000BPH Small Juice Bottle Liquid Filling Production Machine Food
Beverage Machinery
Product Description:
1. The filling line is mainly used in the beverage filling
operations. The three functions of bottle wash, fill and seal are
composed in one body of the machine. The whole process is
automatic.
2. The machine is used in filling juices,beverage in bottles made
of polyester and plastics. The machine can also be used in hot
filling if being installed with temperature controlling device. The
handle of the machine can be freely and conveniently turned to
adjust the machine to fill various types of bottles.
3. The filling operation is faster and more stable because the
micro pressure filling operation of the new type is adopted. There
the output and benefit of the machine is higher than the machinery
of the same specifications.
4. The advanced OMRON programmed controller (PLC) is adopted to
control the machine to run automatically while a transducer is used
in the bottle -entering chains to adjust speeds and coordinated
with the transducer of the main machine to make the operations of
moving bottle forward steadily and reliably.
5. It is convenient to operate with higher automation because every
part of the machine is inspected to run with photo electricity, On
the bases, the filling parts of the machine can be changed into
filling methods of lower vacuum.
Features:
1. Bottles transmission adopt clip bottleneck technology.
2. The specially designed stainless steel bottle washing machine
clip is soild and durable,no touch with the screw location of
bottle mounth to avoid secondary pollution.
3. The whole machine adopts PLC computer program control and
human-machine interface touch screen button, tank liquid level
automatic control, no bottle no filling, no bottle no stamp, and
other functions, and does not hurt the cover and seal tightly
reliable equipment.
4. The introduction of the latest foreign technology, using
quantitative liquid surface filling pressure type principle,
filling speed, liquid level control, no drop leak phenomenon.
This CGF Wash-filling-capping 3-in-1unit: Beverage Machinery is
used to produce polyester bottled mineral water, purified water,
alcoholic beverage machinery and other non-gas beverage machinery.
Beverage Machinery can finish all the process such as washing
bottle, filling and sealing, it can reduce the materials and
Outsiders touch time, improve the sanitary conditions, production
capacity and economic efficiency.The Complete Bottled Mineral Water
/ Pure Water Production Line used in the beverage filling
operations. The three functions of bottle wash, fill and seal are
composed in one body of the machine. The whole process is
automatic.
Bottle line automatic water filling machine/water filling machine
for sale
Washing Parts.
- Into bottle way is air conveyor direct connection with bottle
dial.
- All 304/316 stainless steel rinse heads, water spray style inject
design, more save water consumption and more clean.
- 304/316 Stainless steel Gripper with plastic pad, ensure minimal
bottle crash during washing.
- 304/316 stainless steel washing pump make the machine more
durable.
Filling Parts.
- 304/316 Stainless steel high precision filling nozzle
- Filling volume adjustable in fine rank, same liquid level after
filling
- All 304/316 stainless steel contact parts & liquid tank, fine
polish, no death corner, easy to clean
- 304/316 stainless steel filling pump
- Efficient spray nozzle rinse thoroughly and save water for
flushing
Capping Parts.
- Place and capping system, electromagnetic capping heads, with
burden discharge function, make sure minimum bottle crash during
capping
- All 304/316 stainless steel construction
- No bottle no capping
- Automatic stop when lack of bottle
- Capping effect is stable and reliable, Defective rate ≤0.2%
Air Conveyor.
- Air conveyor is fixed on the floor, with fan installed on the
top.
- Air filter is positioned at every entrance of air fan, to prevent
dust blown into bottles.
- Bottles are held on the neck in the conveyor and transported into
filling machine by blowing power.
- All are made of stainless steel SUS 304 /316.
- Rack made by high quality carbon steel welded.
Flat Conveyor.
- Energy saving. High efficient. Adapt to customer factory layout
- Special lubrication system, keep products clean, health, safety
- Extended service life
- Electric eyes design keep whole line running safety and quickly
- Overload protection mechanism to effectively ensure the safety of
the machine
| Model | RGF14-12-4 | RGF18-18-6 | RGF24-24-8 | RGF32-32-10 | RGF40-40-12 | RGF50-50-15 |
| Capacity | 3000BPH | 6000BPH | 8000BPH | 10000BPH | 15000BPH | 22000BPH |
| Washing No | 14Heads | 18Heads | 24Heads | 32Heads | 40Heads | 50Heads |
| Filling No | 12Heads | 18Heads | 24Heads | 32Heads | 40Heads | 50Heads |
| Capping No | 4Heads | 6Heads | 8Heads | 10Heads | 12Heads | 15Heads |
| Diameter of bottles :50-100mm |
| Height of bottle :100-300mm |
| Motor power | 2.2KW | 3.7KW | 5.5KW | 7.5KW | 11KW | 15KW |
Zhangjiagang City Bievo Machinery Co., Ltd. is located in a
national level development zone - Zhangjiagang Economic And
Technology Development Zone, covering area more than 8,000 square
meters.We enjoy convenient transportation with Shanghai Hongqiao
International Airport and Shanghai Pudong International Airport on
hand.Which accumulated a great number of China's top technologists
in the liquid beverage industry.We have complete system from
designing, manufacturing, installation, training to after
service.Our main product water production line, carbonated beverage
production line . Fruit juice and milk production line ,3 to 5
gallons production line, daily chemical production line and so
on.Plat and tube UHT device, CIP system.All the products are sold
well.We devote ourselves to the development, research and
production of liquid food and beverage filling and packing industry
.
<1>Installation, debug
After equipment reached the workshop of customer, place the
equipment according to plane layout we offered. We will arrange
seasoned technician for equipment installation, debug and test
production at the same time make the equipment reach the rated
producing capacity of the line. The buyer need to supply the round
tickets and accommodation of our engineer, and the salary.
<2>Training
Our company offer technology training to customer. The content of
training is structure and maintenance of equipment, control and
operation of equipment. Seasoned technician will guide and
establish training outline. After training, the technician of buyer
could master the operation and maintenance, could adjust the
process and treat different failures.
<3>Quality guarantee
We promise that our goods are all new and not used. They're made of
suitable material, adopt new design. The quality, specification and
function all meet the demand of contract. We promise that the
products of this line could storage for one year without adding any
aseptic.
