FSM335~FSM345M60HB (335W/340W/345W) 120*9BB MONO PERC Half-Cell
Full Black PV Module
Electrical Characteristics under STC
| Module Type | FSM335M60HB | FSM340M60HB | FSM345M60HB |
| Maximum Power-Pmax (Wp) | 335 | 340 | 345 |
| Voltage at Maximum Power-Vmp (V) | 34.0 | 34.2 | 34.4 |
| Current at Maximum Power-Imp (A) | 9.87 | 9.96 | 10.04 |
| Open Circuit Voltage-Voc (V) | 41.5 | 41.7 | 41.9 |
| Short Circuit Voltage-Isc (A) | 10.36 | 10.55 | 10.64 |
| Module Efficiency-ηm (%) | 19.9% | 20.1% | 20.5% |
| Operating Temperature | -40℃ to +85℃ |
| Maximum System Voltage | 1000V/1500V DC (IEC) |
| Power Tolerance | 0~+4.99W |
| Temperature Coefficients of Pmax | -0.350%/℃ |
| Temperature Coefficients of Voc | -0.289%/℃ |
| Temperature Coefficients of Isc | 0.048%/℃ |
Mechanical Characteristics
| Cell Type | MONO PERC 158.75×79.375mm |
| No. of Cells | 120 (6×20) |
| Dimension | 1684×1002×35mm |
| Weight | 19 Kg |
| Junction Box | IP68, 3*20A diodes |
| Output Cables | 4.0mm², 500mm Length (Optional) |
| Connectors | MC4 compatible |
| Packing | 31PCS/Pallet, 858PCS/40’HC |
Key Features
- Anti-reflective coated glass to increase module efficiency up to 2%
and improve self cleaning ability.
- 9BB mono PERC half cell design with less internal power loss to
guarantee higher output power and higher module efficiency.
- Half-Cell series PV module offers better temperature-dependent
performance, less shading effect on the energy generation, lower
risk of hot spot.
- High transmittance tempered glass and cell surface textured design
ensure excellent performance in low-light environment.
- Excellent Anti-PID performance guarantee limited power degradation
for mass production.
- Split junction boxes with high quality diodes to protect electric
safety of the whole PV system.
- Mechanical load with high strength: front side max. 5400Pa and rear
side max. 2400Pa according to IEC61215 & IEC61730 standards.
- Three channels of EL automatic detections, four times of visual
inspections and power test before packing.
- Full production from automatic equipment and production lines to
eliminate human errors and scratches.
- Barcode, material and parameter binding data traceable, searchable
and freezing.
- Intelligent MES system applied on production lines to reduce waste
and ensure higher efficient production.
- Around 0.55% annual power degradation and 30 years linear power
damping warranty.
- Optimal packing solutions for container loading and shipment to
ensure products safety during transportation.
Extra Care of Full Black Solar Panels from FINERGY
Raw Material QC:
1. Glass: FINERGY sources anti-reflective coated glasses from FLAT
Glass or CSG. The QC staffs will take inspections on each glass.
Any piece with scratches will be rejected to pass. Otherwise, it
will be very clear on full black solar panel.
2. Solar Cell: FINERGY only sources mono PERC solar cells with
uniform dark blue color which is only 20% of mass production. Color
and characteristics sorting on each cell by machine.
3. Backsheet: FINERGY only sources from Jolywood or 3M who's the
top supplier of black backsheet. Both the quality and color are
perfect.
4. Aluminum Frames: FINERGY only sources from the fixed supplier
with qualified anodized aluminum frame in uniform black color.
Production QC:
1. FINERGY takes performance and visual classification on each
solar cell. The similar solar cells are allowed in a panel only.
2. There're 3 channels of EL inspections on automatic production
line to ensure the internal quality.
3. FINERGY QC team takes 4 times visual inspections on color
matching from solar cells to after lamination. No color mixed solar
panel is allowed to send to customers.
4. The frames installation is completed by robots to eliminate
scratches on surface.
Automatic Production
Workshop Environment
Certification Trade Mark
