FSM275~FSM285P60 (275W/280W/285W) 60*5BB Poly Crystalline Solar
Cell PV Module
Electrical Characteristics under STC (STC: Irradiance 1000W/㎡, Cell Temperature 25℃, Air Mass 1.5)
| Module Type | FSM275P60 | FSM280P60 | FSM285P60 |
| Maximum Power-Pmax (Wp) | 275 | 280 | 285 |
| Voltage at Maximum Power-Vmp (V) | 31.5 | 31.8 | 32.2 |
| Current at Maximum Power-Imp (A) | 8.73 | 8.81 | 8.86 |
| Open Circuit Voltage-Voc (V) | 38.3 | 38.5 | 38.9 |
| Short Circuit Voltage-Isc (A) | 9.17 | 9.23 | 9.28 |
| Module Efficiency-ηm (%) | 16.9% | 17.2% | 17.5% |
| Operating Temperature | -40℃ to +85℃ |
| Maximum System Voltage | 1000V/1500V DC (IEC) |
| Power Tolerance | 0~+4.99W |
| Temperature Coefficients of Pmax | -0.40%/℃ |
| Temperature Coefficients of Voc | -0.31%/℃ |
| Temperature Coefficients of Isc | 0.04%/℃ |
Mechanical Characteristics
| Cell Type | 5BB Poly Crystalline 157×157mm |
| No. of Cells | 60 (6×10) |
| Dimension | 1640×992×35mm |
| Weight | 17.5 Kg |
| Junction Box | IP68 rated, 3*20A diodes |
| Output Cables | 4.0mm², 1100mm Length (Optional) |
| Connectors | MC4 compatible |
| Packing | 31PCS/Pallet, 952PCS/40’HC |
Product Information
- High efficiency 5BB Poly Crystalline Solar Cell adopts new
technology to guarantee higher output power and higher module
efficiency.
- Excellent Anti-PID performance guarantee limited power degradation
for mass production.
- High transimission tempered glass and cell surface textured design
ensure excellent performance in low-light environment.
- Graphene coated on surface of glass to let dusts falling down with
rain to increase power generation and product lifespan.
- Certified to withstand: front side max. 5400Pa, rear side max.
2400Pa.
- IP68 rated junction box with schottky diodes to protect the whole
PV system damage.
- MC4 compatiable connectors for solar system easy installation.
- MES system applied together with production line to ensure product
data searchable and traceable.
- 12 years product workmanship warranty and 30 years linear power
damping warranty.
- Three times EL inspections and power test before packing.
What we do?
FINERGY is devoted to design, manufacture, develop and sell variety
of mono and poly crystalline solar panels. Meanwhile FINERGY is
concertrating on wide range of on-grid and off-grid photovoltaic
power plants, commercial, residential and industrial integrated
solar power generating system.
QC system:
We have excellent QC system, and we are focus each step on
processing modules. FINERGY completes rigoros materials testing
before and during module production in order to ensure that only
the best becomes into modules, each cell is individully inspected
and power matched in order to ensure consistent performance among
the cells in module array.
Once assembled, each of our PV module undergoes further testing to
ensure consistently high quality. Every module is given a complete
visual inspection to verify that its appearance meets our
standards. Our modules then undergi further testing via EL and
flash simulators to ensure accurate minimum power voltage and
current rating.
Workshop & Production Line
Project Reference in 2020
Solar Exhibition in Europe
