Mono Perc Bifacial N Type Solar Panel Dual Glass 440W 9BB M6 Half Cell PV Module

FSM430~FSM440M60HL (430W/435W/440W) MONO PERC Half-Cell Bifacial PV Module

KEY FEATURES

• Bifacial 9 Busbar M6 Mono Half-Cut Solar Cell adopts PERC technology to guarantee higher output power and higher module efficiency.
• Mono PERC Half-Cell PV module offers better temperature-dependent performance, less shading effect on the energy generation, lower risk of hot spot.
• Excellent Anti-PID performance guarantee limited power degradation for mass production.
• Double glasses encapsulation guarantees 20 years life time warranty and 30 years linear power warranty.
• Advanced glass and cell surface textured design ensure excellent performance in low-light environments (e.g. early morning, dusk and cloud, etc).
• Module power increases 5%~25% from backside (as per different reflective condition), lower LCOE and higher IRR.
• Three channels of automatic EL detections and final power test before packing.
• Barcode, material and parameter binding data traceable, searchable and freezing

Electrical Characteristics under STC

Mechanical Characteristics

FAQ of Bifacial Solar Panels

Q1: How much additional power generation for bifacial solar panels?

A: Finergy bifacial solar panels can help you get extra power generation from rear side. The additional power gain depends on the albedo of materials on rear side, up to 25% additional power generation gain from the rear side.

Q2: Because of dual glasses, is it too heavier to move?

A: For bifacial solar panels with dual glasses from Finergy, both glasses are 2mm thickness, totally 4mm. But for normal solar panels, the glass is 3.2mm thickness. In this case, it's only 4kg heavier.

Q3: Where to install bifacial solar panels best?

A: Finergy recommends customers to install bifacial solar panels with dual glasses on ground mounted and floating solar PV stations. For ground mounted PV plants, you can obtain 9% additional power from rear side on sand ground. For floating solar PV stations, glass is much more dependable on life time. Besides this, you can get 5% additional power from rear side of water.

Automatic Production Dispaly

Reference

Finergy Tech is one of the pioneering solar PV companies in China that has been involved in the production of innovative solar photovoltaic modules from thin silicon cells with high efficiency. The basic materials for the production of photovoltaic modules are: silicon photovoltaic cells, EVA/POE film used to bond silicon cells with glass using the phenomenon of molecular bonding obtained at high temperature, and aluminum frames. The materials are delivered directly by manufacturers - world industry leaders, whose products are characterized by high quality and energy efficiency. The production of PV modules take place on automatic technological lines, which eliminates the risk of human error. Finergy brand solar modules are manufactured in accordance with international standards of IEC61215:2016 and IEC61730:2016. Currently, the capacity of the Finergy Tech production line allows for a production capacity of 500MWp per year. Finergy Tech continuously delivers high quality solar PV modules to customers worldwide, and products are widely used for houses, factories and public facilities in more than 60 countries such as Germany, Italy, Japan, Korea, Australia, Mexico, Chile, etc.

The company's strategy is to provide a product with the highest possible efficiency and quality, while at the same time taking care to maintain a relatively low level of prices for its modules. The company's goal is to promote a natural source of solar energy. The priority task is the quality policy. The company has a quality management system and the following quality certificate:
ISO 9001: 2008 - in the field of investment project management.

In the field of production management, Solar - Energy is certified under the following standards:

ISO 9001: 2008, ISO 14001: 2004, OHSAS18001:2007