9BB M6 370W Mono PERC Half Cell Solar Photovoltaic Module

FSM360~FSM370M60HL (360W/365W/370W) 9BB M6 MONO PERC Half-Cell PV Module

KEY FEATURES

• 9 Busbar M6 Mono Half-Cut Solar Cell adopts PERC technology to guarantee higher output power and higher module efficiency.
• Mono PERC Half-Cell PV module offers better temperature-dependent performance, less shading effect on the energy generation, lower risk of hot spot.
• Excellent Anti-PID performance guarantee limited power degradation for mass production.
• Advanced glass and cell surface textured design ensure excellent performance in low-light environments (e.g. early morning, dusk and cloud, etc).
• Certified to withstand: wind load (2400 Pa) and snow load (5400Pa)
• High salt mist and ammonia resistance certified by TUV
• Three channels of online EL inspections and power test before packing
• Barcode, material and parameter binding data traceable, searchable and freezing
• 12 years product warranty and 25 years linear power warranty

Electrical Characteristics under STC

Mechanical Characteristics

FAQ of Finergy Solar Panels

Q1: How to install Finergy solar panels?

A: There're two MC4 compatible connectors on the back of each Finergy solar panels. It's only necessary to connect the plus "+" one with the negative "-" one of another panel. When to fix the panels on structures, you can use clips. It's available for Finergy to provide solar panels installation mannual to customers who buy either solar panels or a whole solar power system from us.

Q2: What's advantage of a half cell solar panel?

A: Because of half cell deisgn, the power loss is smaller when the current goes through each cell. By the way, even half of the panel is shaded, it's possible to gain 50% of the output power.

Q3: What's the production capacity of Finergy?

A: Finergy's annual production capacity of solar panels has reached 800MW till now. After materials are ready, it's available for us to finish more than 5,000 pieces of solar panels a day.

Production Plant

References

Finergy Tech is one of the pioneering solar PV companies in China that has been involved in the production of innovative solar photovoltaic modules from thin silicon cells with high efficiency. The basic materials for the production of photovoltaic modules are: silicon photovoltaic cells, EVA/POE film used to bond silicon cells with glass using the phenomenon of molecular bonding obtained at high temperature, and aluminum frames. The materials are delivered directly by manufacturers - world industry leaders, whose products are characterized by high quality and energy efficiency. The production of PV modules take place on automatic technological lines, which eliminates the risk of human error. Finergy brand solar modules are manufactured in accordance with international standards of IEC61215:2016 and IEC61730:2016. Currently, the capacity of the Finergy Tech production line allows for a production capacity of 500MWp per year. Finergy Tech continuously delivers high quality solar PV modules to customers worldwide, and products are widely used for houses, factories and public facilities in more than 60 countries such as Germany, Italy, Japan, Korea, Australia, Mexico, Chile, etc.

The company's strategy is to provide a product with the highest possible efficiency and quality, while at the same time taking care to maintain a relatively low level of prices for its modules. The company's goal is to promote a natural source of solar energy. The priority task is the quality policy. The company has a quality management system and the following quality certificate:
ISO 9001: 2008 - in the field of investment project management.

In the field of production management, Solar - Energy is certified under the following standards:

ISO 9001: 2008, ISO 14001: 2004, OHSAS18001:2007