900mm Motion Sensor Module | Linear High Bay Industrial Lighting
Led Linear Trunking System with Daylight Motion Sensor Module
DESCRIPTION
Coreshine U-LINE Indirect Led Linear Lighting System is a new innovation solution
for creating beautiful and efficient lighting.
1. High efficiency up to 150 lm/w, energy savings up to 90% long
life, 50,000 hours lifespan
2. 60 degree 120 degrees diffuse with track spotlight which can be
adjustable in any angle
3. Quick start without delay and flickery
4. Low THD under 15%, High Power factor >0.95
5. RoHS-conformity, no mercury
6. Directly fits into USA standard and Europe standard
7. Length available in 600mm, 1200mm, 1500mm, 2400mm, 3000mm
8. Widely Application: Supermarkets, Shopping malls, Exhibition
halls, supermarkets, Office, Parking Lot …
DETAILS
U-Line with Multi-sensor
The Multi-sensor system combines energy-saving with high
convenience for users. Most energy can be saved by integrating
motion and daylight sensors into the trunking. It can swivel and
help to detect the area accurately. It ensures a sufficient level
of brightness in specific areas under a defined period of time.
Group control sensor or broadcast control sensor
Coreshine Daylight Sensor:
Daylight mode operation only.
By detecting the light level, our led linear system can be
self-adjustable the brightness via the Daylight sensor, then it
reaches the purpose of saving energy and cost.
Coreshine Motion Sensor:
Motion mode operation only.
On this mode, it can detect the long-distance motion of humans via
motion sensors.
| H:8m | H:15m |
| Lamp installation height>=3m L1:2.5mm L2:2m Lamp installation height<=3m if it's 3m L1=tan40°*H*2 L1=5M L1=tan20°*H*2 L1=2.1M | Lamp installation height>=6m L1:1mm L2:1m Lamp installation height<=6m if it's 6m L1=tan40°*H*2 L1=10M L1=tan20°*H*2 L1=4.3M |
Coreshine Motion + Daylight:
This mode combines the motion sensor and daylight sensor for light
dimming control. It can automatically adjust the lighting to reach
the defined brightness, then remains at a lower brightness level
during the stand-by time, if there is no any object be detected
again after the stand-by time, the lamp will automatically be
switched off. This mode can be widely applied in such as office,
factory, or warehouse. It can save energy largely without any
manual control.
Setting:
Sensitivity
Detection area can be adjusted by selecting the combination on the
DIP switches to fit precisely each application.
Please noted, there will be possible to make misinformation on
object detection while with setting as 100% sensitivity.
Hold time
Refers to the time period the lamp remains at 100% illumination
after motion object leaves the detection area.
The main advantage of our microwave sensor is the long-distance
detection. Comparing with Other brands, CoreShine microwave sensor
can detect signal from up to 8m distance. And we will install
several pieces microwave on the led linear. Our microwave sensor
have the following main advantages:
Motion sensor
- 330 ° rotation, with small angle while long distance,detect the
motion from the target location.
- High resistance to the temperature variation.
- Except the horizontal and vertical angle, Microwave sensor also
support the horizontal rotation ( 330°) and vertical rotation (
60°)
| Length | detection | Code No. |
| 600mm | 8m detection | CUM-0608-X1WH-X2 |
| 15m detection | CUM-0615-X1WH-X2 |
| 1200mm | 8m detection | CUM-1208-X1WH-X2 |
| 15m detection | CUM-1215-X1WH-X2 |
