Brass Breathable Metal M5 * 1.5 Waterproof Air Vents Valve
Material
Stainless steel/Brass plated nickel/Aluminum
Protection function
O-ring can reach waterproof IP68 when DETH to 3-5M test of vibration and impact IEC-60077-1999,conform with ROHS
standard.
Material
Nylon PA6
Protection function
O-ring can reach waterproof IP68 when DETH to 3-5M.
Color
Gray,white,black and customized color.
Temperature:work temperature
-40℃ to 120℃,short time to 150℃.
Air flow
325ml/minute(0.07)
Pressure in water
>5 bar
Specific applications
Charger, Inverter, IPDM, Battery, etc.
Benefits
1. Waterproof and protection of electronic components;
2. Dust-proof, keep ventilation and heat dissipation;
Three. Ventilation, keep indoor dry, prolong the use of time;
4. Reduction of condensation events through effective water vapor
transport.
Installation
1. Make sure the installation surface is clean and free of oil and
other contaminants.
2. As shown in the installation drawing, ventilation holes should
be installed on flat, vertical surfaces for optimum performance.
| Item | Air permeability | Thread Diameter
(mm) | GL
Thread Length
(mm) | Total Length
(mm) | Spanner Size
(mm) | Code |
| Metal |
| M5×0.8 | 94ML/Min | 5 | 6 | 9.5 | 10 | HX-BF-M5 |
| M6×1 | 94ML/Min | 6 | 6 | 15 | 10 | HX-BF-M6 |
| M8×1 | 147ML/Min | 8 | 7 | 16 | 12 | HX-BF-M8 |
| M12×1.5 | 288ML/Min | 12 | 7 | 19 | 14 | HX-BF-M12 |
| M16×1.5 | 1375ML/Min | 16 | 7 | 21 | 18 | HX-BF-M16 |
| M20×1.5 | 2150ML/Min | 20 | 7 | 21 | 22 | HX-BF-M20 |
| Nylon |
| M5×0.8 | 60ML/Min | 5 | 6 | 11.6 | 11 | HX-PF-M5 |
| M6×1 | 60ML/Min | 6 | 6 | 11.6 | 11 | HX-PF-M6 |
| M10×1 | 1820ML/Min | 10 | 9 | 17 | 17 | HX-PF-M10 |
| M12×1.5 | 260ML/Min | 12 | 9 | 17 | 17 | HX-PF-M12 |
| M16×1.5 | 748ML/Min | 16 | 9 | 22 | 22 | HX-PF-M16 |
| Order | Technical parameter characteristic | Test data |
| 1 | Waterproof grade | IP65-IP68 |
| 2 | code | SRM1300281/2 |
| 3 | air permeability | 25200-2800ML//min/7kpa |
| 4 | Minimum pass size | <=0.5UM |
| 5 | flame retardant rating | UL 94 VO |
| 6 | Temperature resistance | -40ºC~125ºC |
| 7 | antiseptic properties | PH:1~14 |
| 8 | pressurization | >=30KPA |
| 9 | Outer material | stainless steel/nylon |
| 10 | Exterior color | Metallic color |
| 11 | L value | 10mm |
| 12 | A value | M12*1.5 |
| 13 | B value | Φ8.0mm |
| 14 | C value | Φ2.5mm |
| 15 | Installation Method | Through hole:Φ11.8~12.1mm/ |
| Thread hole:M12*1.5 |
| 16 | Installation torsion | 3-5kgf.cm |
FAQ
Q: Are you trading company or manufacturer?
A: We are the factory. Also we can export the goods by ourselves.
Q: How long is your delivery time?
A: Generally we can send out the the goods within 3-7 days if the
goods are in stock.Or it is should be 7-30 days if the goods are not in stock, it is according to your order quantity.
Q: Do you provide samples? Is it free or extra?
A: Yes, we could offer the samples for free charge but do not pay the cost of freight.
Q: What is your terms of payment?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30%
T/T in advance, balance before shipment.
Q: How about the after-sale service?
A: Any feedback or comments are welcomed. We will try to make the best
assistant to let you maximum satisfaction.
