AD15.8 Black & Red Standard PA Nylon Plastic Flexible Corrugated
Pipe CE
PP (polyethylene)
-30 ℃ -110 ℃, short time to 130 ℃.
Black, other colors can be customized.
European CE, European environmental ROHS
Soft and flexible, anti twist; good mechanical strength, can bear
heavy load; acid resistance, cuttings liquid, lubricating oil,
coolant and so on; surface gloss, friction resistance; black
resistance to ultraviolet light, high mechanical strength
Can protect wire and cable from external wear and insulation load.
It can withstand the pressure of foot and higher strength without
deformation, but it can recover quickly and there is no damage to
itself.
Wind power generation, subway track, electric locomotive
compartment use; mechanical manufacturing, electrical insulation
protection, public transportation equipment; lighting equipment;
automobile manufacturing, aviation equipment and so on;
Wire and cable will be inserted into the pipe, and then use the
series of hose connectors.
This product has a high hardness.
| Code | Conduit size | d
Inner size | D
Outer size | Bengding radius | Dynamic Radius |
| HX-PA-10.0 | AD10.0 | 1/4" | 6.50 | 10.00 | 16 | 35 |
| HX-PA-11.6 | AD11.6 | | 8.00 | 11.60 | 16 | 35 |
| HX-PA-13.0 | AD13.0 | 5/16" | 10.00 | 13.00 | 20 | 45 |
| HX-PA-15.8 | AD15.8 | 3/8" | 12.00 | 15.80 | 30 | 60 |
| HX-PA-18.5 | AD18.5 | | 14.30 | 18.50 | 40 | 70 |
| HX-PA-21.2 | AD21.2 | 1/2" | 17.00 | 21.20 | 45 | 75 |
| HX-PA-25.0 | AD25.0 | | 20.00 | 25.00 | 45 | 75 |
| HX-PA-28.5 | AD28.5 | 3/4" | 23.00 | 28.50 | 50 | 110 |
| HX-PA-34.5 | AD34.5 | 1" | 29.00 | 34.50 | 60 | 115 |
| HX-PA-42.5 | AD42.5 | 1-1/4" | 36.00 | 42.50 | 70 | 120 |
| HX-PA-54.5 | AD54.5 | 2" | 48.00 | 54.50 | 90 | 150 |
Plastic hoses are used to manufacture bearings, cams, cams, bevel
gears, various rollers, pulleys, pump impellers, fan blades, worm
wheels, propellers, screws, nuts, gaskets, high-pressure seals,
oil-proof gaskets, oil-resistant containers, shells, hoses, cable
sheaths, shear belt sheaths, Bull-Head planer sliders,
electromagnetic distribution valve seats, cold aging, etc. Various
kinds of oil pipes, pistons, ropes, transmission belts, textile
machinery equipment fog-free materials, as well as daily
necessities, packaging film, etc.
- 1. Hose and hose assembly can only be used to transport design
materials, otherwise it will reduce service life or failure.
- 2. Hoses and hose assemblies can only be used within their
acceptable range and cannot be used under over-designed working
pressure.
- Three. The medium temperature of hose and hose assembly should not
exceed - 40 C-+120 C, otherwise its service life will be shortened.
,
- 4. The use of hoses and hose assemblies shall not be less than the
minimum bending radius of hoses, so as not to bend or bend near the
pipe joints, otherwise it will hinder the hydraulic transmission
and transmission of materials or cause damage.
- Rubber hose assembly.
- 5. Hose and hose assembly shall not be used in torsional state.
- 6. During transportation, hoses and hose assemblies should be
handled with care. Do not drag on sharp or rough surfaces, nor fold
or squeeze.
- 7. Hose and hose assembly should be kept clean, internal clean,
prevent foreign body from entering and damage equipment.
In the industrial production of plastic hose, it is mainly used to
manufacture bearings, cams, cams, bevel gears, various drums,
pulleys, pump impellers, fan blades, worm wheels, propellers,
screws, nuts, gaskets, oil-resistant seals, oil-resistant gaskets,
oil-resistant containers, shells, hoses, cable sheaths, shearing
belt sheaths, bull planer sliders, etc. Electromagnetic
distribution seat, cold aging equipment, liner, bearing cage,
various oil pipelines on automobiles and tractors, pistons, ropes,
transmission belts, zero-fog materials for textile machinery
industry equipment, daily necessities and packaging film.
