DC 12V Worm Gear Electric Sliding Gate Motor 50W for 250kgs Heavy
Gates
Specifications:
Motor Data:
Type | Brush |
Voltage | 12VDC |
Power | 50W |
No-load Speed | 30rpm |
No-load Current | 1.5A |
On-load Speed | 25rpm |
On-load Current | 6.0A |
Stall torque | 45Nm |
Gear material | Bronze |
Protection class | IP44 |
Weight | 3.0kg |
Description:
A gate operator is a mechanical device used to open and close a gate, such as one
at the end of a driveway. There are two main types of electric gate
openers – hydraulic or electromechanical) driven, arm openers and
underground openers. Automatic and Electric Gate operators are
designed for both swinging and sliding gates. They can be
programmed to open and close with a wireless transmitter or a
manual device. Low Voltage Automatic Gate openers can also be
fitted with solar panels to ensure function during loss of
electricity or blackouts.
Applications:
This kind of worm gear reduction motor can be widely used for
Electric Sliding Gate Openers
Competitive Advantage:
Courtesy light -Comes on automatically when the door is in use. The
light will stay on for approximately 3 minutes, then turns off
automatically.
Automatic Safety Reverse – Garage Ace sensors when someone or
something is in the way, and reverses automatically.
Safe and Secure - High security rolling code transmitters. Two
remotes supplied.
Manual Override - Motor can be easily disengaged in the event of
power failure for manual operation of door.
Handy Wall Switch - Door can be operated from switch on interior
mounted control box independently of remote transmitter.
Automatic Run Time - If motor is activated while disengaged, the
auto run time will turn motor off after 30 seconds
Quiet Operation - No need to let the neighborhood know when you
come and go!
DIY Installation - Step-by-step instructions will guide you through
installation. the opener can be installed on the left or right-hand
side of the door.
Motor Outline drawings:
