100kw~70mw Customized Kaplan Hydro Turbine Generator High Water
Head And Low Flow
Brief Introduction
Reaction turbines are acted on by water, which changes pressure as
it moves through the turbine and gives up its energy. They must be
encased to contain the water pressure (or suction), or they must be
fully submerged in the water flow.
Newton's third law describes the transfer of energy for reaction
turbines.
Most water turbines in use are reaction turbines and are used in
low (<30m/98 ft) and medium (30-300m/98–984 ft) head
applications. In reaction turbine pressure drop occurs in both
fixed and moving blades.
Parameters
| Places of Orign | Sichuan,China |
| Type | Kapaln Turbine Generator |
| Frequnecy | 50HZ/60HZ |
| Certificates | ISO 9001 TUV CE |
Impulse turbines change the velocity of a water jet. The jet pushes
on the turbine's curved blades which changes the direction of the
flow. The resulting change in momentum (impulse) causes a force on
the turbine blades. Since the turbine is spinning, the force acts
through a distance (work) and the diverted water flow is left with
diminished energy.
Prior to hitting the turbine blades, the water's pressure
(potential energy) is converted to kinetic energy by a nozzle and
focused on the turbine. No pressure change occurs at the turbine
blades, and the turbine doesn't require a housing for operation.
Newton's second law describes the transfer of energy for impulse
turbines.
Impulse turbines are often used in very high (>300m/984 ft) head
applications .
This belongs to customized products. We could design products
according to your requirement. All of our products are strictly
designed and manufactured under ISO9001 quality management system
and TUV, BV.
Please can you send me below parameters, so our engineers could
support your project?
Where is the plant?
1.Design head: ___m
2.Design flow: ___m³/s
3.Frequency: 50Hz or 60Hz?
4. Unit Capacity: ___KW;How many kw each unit? How many units?
5. Power factorCOSφ:
6.Generator output voltage: __V
7.On-grid or Off-grid type? (On-grid type voltage: ____Kv)
8. a.s.l: ___ m
9.Basic situation about the project and your company introduction.
