Battery Thermal Management System Aerogel Insulation Ceramic Fiber
Aerogel Flame Nano Aerogel
Aerogels have the characteristics of low thermal conductivity, good
thermal insulation effect and non-combustible. Compared with
traditional insulation materials, it only needs 1/5-1/3 thickness
to achieve the same insulation effect. It not only saves more space
for the power battery but also has the characteristics of a heat
preservation effect and a more stable temperature. Therefore, the
application in new energy vehicles can better realize the
temperature control and electronic control management of the
battery and improve the performance, it can play the role of heat
insulation and fire prevention, and buy more time for users and
passengers to escape the scene and extinguish the fire.
Superior Thermal Performance
Up to five times better high-thermal performance than competing
insulation products;
Reduced Thickness and Profile
Equal thermal resistance at a fraction of the thickness;
Less Time and Labor to Install
Nano Aerogel insulation is easily cut and conformed to complex
shapes, tight curvatures, and spaces with restricted access;
Physically Robust and Impact Resistant
Good flexibility and high tensile strength performance can resist
stretching and stress from linear contraction when temperature
changes, and protect critical assets from compromise due to tool
strikes, footfalls, lifting, and transportation.
The main performance parameters are shown in Table
| No. | Subuject | Description |
| 1 | Product Model | Pysheild BP-CF |
| 2 | Thickness | 1~10mm |
| 3 | Wide | 1400±60mm (Customizable) |
| 4 | Colour | White |
| 5 | Maximum Operating Temperature | 650℃ |
| 6 | Density | 280±30kg/m3 |
| 7 | Thermal Conductivity | ≤0.023W/m*K@25℃ | GB/T 10295-2008 |
| ≤0.030W/m*K@100℃ | GB/T 10294-2008 |
| ≤0.036W/m*K@300℃ |
| ≤0.072W/m*K@500℃ |
| 8 | Combustion Rating | A - Level | GB/T 8624-2012 |
| V0 | UL94-2013 |
| 9 | Water Repellency | ＞98% | GB/T10299-2011 |
| 10 | Biosecurity | Meets biosafety requirements | RoHs/REACH/ELV |
| 11 | Burn-through Resistance | 3mm:＞120min | Butane spray gun external flame burning |
| 12 | Thermal Insulation Effect | 1mm:Min≥385℃；2mm:Min≥440℃
3mm:Min≥495℃；4mm:Min≥520℃ |
| 13 | Application Areas | The functions of heat insulation, buffering, flame retardancy,
thermal runaway protection and other functions of new energy
passenger vehicle cells and modules |
Typical Applications
The functions of heat insulation, buffering, flame retardancy,
thermal runaway protection and other functions of new energy
passenger vehicle cells and modules
