GB / T5170.8 Environmental Test Chambers Salt Spray Corrosion Test
Chamber Lab Machine DIN50021 ISO
The salt spray test chamber is a climate simulation device that tests the corrosion of
electronic equipment, metallic material, as well as some surface
treatment--coating, galvanizing, organic/inorganic coating,
anodizing treatment, rust-proof oil coating, etc. Performance
indicators in line with requirements of GB / T5170.8 Electrical and
Electronic Products, Environmental Testing Equipment, the Basic
Parameters of the Test Method. The salt spray corrosion test
chamber according to GB / T2423.17 Electronic and Electrical
Products Basic Environmental Test Procedures Test: Salt Spray Test
Method for neutral salt spray test can also be used for acetic acid
salt test.
Advantages of Salt Spray Environment Test Chamber
● Heater strip housed in base of chamber, effectively & evenly
heating, Easy to exchange.
● Brine in high uniformity, not easy to caking, not blocking
atomizer system
● Quartz nozzle, high temperature resistant, no blocking, easy to
clean.
The products comply with :CNS, ASTM, JIS, ISO standard saltwater spray test is aimed at the surface of various
materials by coating, electroplating, anode treatment, corrosion
prevention oil and other anti-corrosion treatment, test the
corrosion resistance of its products.
Standard:
1.GB/T2423.17-2008/IEC 60068-2-11-1981 Salt spray test method
2. ASTM.B117-2009 salt spray test
3.JIS H8502 salt spray test method
4.GB/T10125-2012/ISO 9227-2006 Salt spray test method
5.GB-T5170.8-2008 Inspection method of environmental test equipment
for electrical and electronic products-salt spray test
equipment
6.GB-T5170.11-2008 Corrosive gas test equipment inspection method
7.ISO9227 salt spray test
8.GB-T10587-2006 Technical conditions of salt spray test chamber
9.ASTM-B117
10.GB/T2423.18-2013 cyclic salt spray test method
The test room adopts imported PVC polyethylene board (Taiwan
Nanya), thickness 8mm, durable temperature at 85℃.
The sealing cover of the test chamber adopts imported acrylic plate
with a thickness of 6mm
The reagent replenishment bottle adopts a hidden type with water
level detection, which is easy to clean and not easy to break.
The pressure air barrel adopts SUS304# stainless steel
high-pressure resistant barrel with the best heat preservation
effect.
The test material rack adopts a flat indexing rack, which can
adjust the angle at will to fall and receive fog on all sides, and
place more samples
The test chamber is sealed by water to ensure that the corrosive
gas in the box does not leak
The control box and the test box are integrated, and the left and
right structure is easy to operate
The water and electricity separation structure is adopted to
effectively prevent water from entering the electrical control box
and damaging the accessories
product description:
Model | B-SST-60 | B-SST-90 | B-SST-120 | B-SST-160 | B-SST-200 |
Internal Dim(W*H*D) | 60x45x40 | 90x60x50 | 120x100x50 | 160x100x50 | 200x100x50 |
External Dim(W*H*D) | 108x63x119 | 140x80x139 | 178x120x149 | 230x130x149 | 270x130x159 |
Cabinet Material |
Corrosion-resistant polymer material |
Laboratory temperature (℃) | A:25℃~70℃ B:0℃-70℃ C:-20℃-70℃ D:-40℃-70℃ |
Saturated air barrel temperature(℃) | 35±1℃50±1℃
Saline test method:35±1℃/Corrosion test method:50±1℃ |
Saturated air pressure (kg/c㎡) | 0.8-2.0±0.01 |
(ml／80c㎡.h)
Salt spray sedimentation rate (ml/80c㎡.h) | 1-2ml/80 cm2.h(Controllable) |
PH value | Salt water test method:6.5～7.2／Test method for corrosion resistance:3.0-3.2
Saline test method:6.5-7.2/Corrosion test method:3.0-3.2 |
Power Source | AC:220V 50Hz/AC:380V 60Hz |
Our Company:
Shanghai BOTO GROUP LTD is a high technology company specializing
in integrated incubation systems. We are conveniently located in
Shanghai City.
With 20+ years of incubator R&D experience from our technical
team, we have developed several series of the advanced integrated
hatchery system.
Also we have gained the Authorized Poultry Industry R&D Center
and been awarded the High-tech Enterprise by Chinese government.
Also, both our company and products are approved by ISO9001,
ISO14001, ISO45001.
Packing/Shipping:
FAQ:
1. Are a manufacturer? Do you offer after-sales service? How can I
ask for that? And how about the warranty?
-Yes, we are manufacturer of 1000L Touch Screen Laboratory
Equipment Constant Temperature Humidity Climatic Test
Chamber/Equipment/Machine/Cabinet . Every machine from our factory
has a 12 months product warranty.If your machine doesn’t work, you can send E-mail to us and we will
try our best to find the problem by email or video chat if
neccesary. After confirmation of the problem, we can send you new
spare parts or provide on-site repair.
2. What’s the delivery term?
-If there is no stock, normally, the delivery time is 15-25 working
days after deposit receipt. If you are in urgent need, we can
consider making a special arrangement for you.
3. Do you accept customization service? Can I have my logo on the
machine?
-Yes, of course. We can not only offer standard machines, but also
customized
machines according to your requirements. And we can also put your
logo on the machine
4. what about the products' quality?
-Each batch of parts is done quality sampling inspection before
into the warehouse, and Each product before delivery is tested by
the national authoritative third-party inspection agency.
5.what about the packing of equipment?
-We use Standard Export Plywood Case to Protect it from rust during
the long time shipping with the plastic film and protect its
corners with the foam.
