Light Weight Good Shock Absorption Performance Magnesium Alloy Bar
Low density, good specific performance, good shock absorption
performance, good electrical and thermal conductivity, good process
performance, poor corrosion resistance, easy oxidation and
combustion, and poor heat resistance.
Its processing process, corrosion and mechanical properties have
many characteristics: fast heat dissipation, light weight, good
rigidity, certain corrosion resistance and dimensional stability,
impact resistance, wear resistance, good attenuation performance
and easy recycling; in addition, it has high Thermal and electrical
conductivity, non-magnetic, good shielding and non-toxic
characteristics.
Scope of application: Magnesium alloys are widely used in portable
equipment and the automotive industry to achieve the purpose of
light weight.
The processing, corrosion and mechanical properties have many
characteristics: fast heat dissipation, light weight, good
rigidity, certain corrosion resistance and dimensional stability,
impact resistance, wear resistance, good attenuation performance
and easy recycling; in addition, it has high thermal conductivity
And conductive properties, non-magnetic, good shielding and
non-toxic characteristics.
Scope of application: Magnesium alloys are widely used in portable
equipment and the automotive industry to achieve the purpose of
light weight.
Although the specific gravity of magnesium alloy is heavier than
that of plastic, the strength and elastic modulus per unit weight
are higher than that of plastic. Therefore, in the case of parts
with the same strength, magnesium alloy parts can be made thinner
and lighter than plastic parts. In addition, since the specific
strength of magnesium alloy is also higher than that of aluminum
alloy and iron, the weight of aluminum or iron parts can be reduced
without reducing the strength of parts.
Magnesium Alloy Chemical Composition:
| Alloy Element | Type | Chemical Composition% | Other elements b |
| Mg | Al | Zn | Mn | Ce | Zr | Si | Fe | Ca | Cu | Ni | Be | Sub-total | total |
| MgAlZn | AZ31B | Balance | 2.5-3.5 | 0.6-1.4 | 0.1-0.2 | --- | --- | ≤0.08 | ≤0.003 | ≤0.04 | ≤0.01 | ≤0.001 | --- | ≤0.05 | ≤0.30 |
| AZ40M | Balance | 3.0-4.0 | 0.2-0.8 | 0.15-0.5 | --- | --- | ≤0.10 | ≤0.05 | --- | ≤0.05 | ≤0.005 | ≤0.01 | ≤0.01 | ≤0.30 |
| AZ80A | Balance | 7.8-9.2 | 0.2-0.8 | 0.12-0.5 | --- | --- | ≤0.10 | ≤0.005 | --- | ≤0.05 | ≤0.005 | --- | --- | ≤0.30 |
| AZ91D | Balance | 8.5-9.5 | 0.45-0.9 | 0.17-0.4 | --- | --- | ≤0.08 | ≤0.004 | --- | ≤0.025 | ≤0.001 | 0.0005- | ≤0.01 | ≤0.30 |
| 0.003 |
| MgMn | M2M | Balance | ≤0.20 | ≤0.30 | 1.3-2.5 | --- | --- | ≤0.10 | ≤0.05 | --- | ≤0.05 | ≤0.007 | ≤0.01 | ≤0.01 | ≤0.20 |
| MgZnZr | ZK61M | Balance | ≤0.05 | 5.0-6.0 | ≤0.10 | --- | 0.3-0.9 | ≤0.05 | ≤0.05 | --- | ≤0.05 | ≤0.005 | ≤0.01 | ≤0.01 | ≤0.30 |
| MgMnRe | ME20M | Balance | ≤0.20 | ≤0.30 | 1.32-2.2 | 0.15-0.35 | --- | ≤0.10 | ≤0.05 | --- | ≤0.05 | ≤0.007 | ≤0.01 | ≤0.01 | ≤0.30 |
Processing technology:
Compared with traditional magnesium alloy, Semi-continuous casting
has higher strength and extensibility on its organization and
composition.
1. Magnesium liquid pouring directly from the holding furnace and
making it rapidly crystallization by pipetting and twice refining
with high purity and less impurity. it can improve the compactness
of the inner metallurgical structure of magnesium rod and make its
a more reasonably inner densification crystallization. And the
physical nature is greatly enhanced comparing to the traditional
casting products.
2. The impurities in rhyolite even tends to zero in the molding
product. semi continuous casting magnesium alloy adopts new inert
gas protection device, which greatly reducing the amount of
entrapped slag and improving the product quality . in the
traditional process , the smelting process is completely exposed to
the air, which can only inflaming retarding by rholite etc.
3. The surface is smooth and clean, no porosity, no shrinkage, no
slag inclusion.
4. The length is flexible. Its existing maximum diameter is Φ600mm.
it can be peeled, cut as customized. In addition, we also can
produce other different specification product to meet
customers’requirement. Various of specifications of magnesium ally
flat bar can be semi continuous cast.
Product advantages:
- Light weight. Magnesium metal is the lightest metal material in the
world .
- High specific strength .magnesium alloy has a high strength and
quality, it also has a certain bearing capacity.
- mall modulus of elasticity. has better strength and anti-seismic
and not easily distortion .
- Good anti electromagnetic interference and shield .
- Non pollution and recycle.
- Stable dimensionally and easy processing.
Magnesium Alloy bar Picture show:
Specification:
| Name | Type | specification | Remarks |
| magnesium alloy | AZ31B | Casting round bar billet(Φ3-160*3000) | According to the requirements of sawing and heat treatment |
| ZK61M/ZK60 |
| AZ80A |
| AZ91D |
| M2M |
| ME20M AZ40 |
Magnesium Alloy Chemical composition:
| Alloy Element | Type | Chemical Composition% | Other elements b |
| Mg | Al | Zn | Mn | Ce | Zr | Si | Fe | Ca | Cu | Ni | Be | Sub-total | total |
| MgAlZn | AZ31B | Balance | 2.5-3.5 | 0.6-1.4 | 0.1-0.2 | --- | --- | ≦0.08 | ≦0.003 | ≦0.04 | ≦0.01 | ≦0.001 | --- | ≦0.05 | ≦0.30 |
| AZ40M | Balance | 3.0-4.0 | 0.2-0.8 | 0.15-0.5 | --- | --- | ≦0.10 | ≦0.05 | --- | ≦0.05 | ≦0.005 | ≦0.01 | ≦0.01 | ≦0.30 |
| AZ80A | Balance | 7.8-9.2 | 0.2-0.8 | 0.12-0.5 | --- | --- | ≦0.10 | ≦0.005 | --- | ≦0.05 | ≦0.005 | --- | --- | ≦0.30 |
| AZ91D | Balance | 8.5-9.5 | 0.45-0.9 | 0.17-0.4 | --- | --- | ≦0.08 | ≦0.004 | --- | ≦0.025 | ≦0.001 | 0.0005-
0.003 | ≦0.01 | ≦0.30 |
| MgMn | M2M | Balance | ≦0.20 | ≦0.30 | 1.3-2.5 | --- | --- | ≦0.10 | ≦0.05 | --- | ≦0.05 | ≦0.007 | ≦0.01 | ≦0.01 | ≦0.20 |
| MgZnZr | ZK61M | Balance | ≦0.05 | 5.0-6.0 | ≦0.10 | --- | 0.3-0.9 | ≦0.05 | ≦0.05 | --- | ≦0.05 | ≦0.005 | ≦0.01 | ≦0.01 | ≦0.30 |
| MgMnRe | ME20M | Balance | ≦0.20 | ≦0.30 | 1.32-2.2 | 0.15-0.35 | --- | ≦0.10 | ≦0.05 | --- | ≦0.05 | ≦0.007 | ≦0.01 | ≦0.01 | ≦0.30 |
Advantage of Hilbo company:
Full range of product types, Ensure production capacity
We ave advanced die-casting, extrusion, forging, rolling, casting
processing production line and precision testing equipment. Can
produce a variety of types of magnesium alloy and magnesium alloy
products, and developed a high-strength magnesium alloy extruded
sheet. Through the purification of ordinary magnesium, magnesium
can be raised up to 99.99% of high purity.
Cost advantage
Magnesium alloy casting production can customized as your
requirement. the technical process is great, extrusion production
required for a variety of bar, no need to purchase from abroad,
extrusion molding products is easy molding, low energy consumption,
saving production costs.
Workshop:
Product technology advantages
Engaged in magnesium smelting technology personnel with more than
15 years experience, from the selection of primary materials to
smelting processing has a wealth of experience and mature
management techniques.
We are in magnesium ingots, magnesium alloy extrusion products have
technical research and development capabilities. We are come out in
front in the Magnesium alloy production enterprises
Testing Equipment
Our services:
1. Small order quantity available
2. Professional engineering team and sales team
3. Payment: T/T & Western Union
4. OEM/ODM Supporttable
5. Free samples provided
6. Competitive price and high quality
Certificate:
We have attained ISO9001 and ISO14001 certificates, Standardize and
improve the enterprise quality management system.
How can I contact with your company?
We are always ready to serve you via Email, Telephone, Fax, Skype,
Whatsapp or Mobile
telephone.
