IP55 Waterproof Electrical Enclosure Boxes 1300mm Galvanized Steel
1. Outdoor Electrical Cabinet Description
This series cabinet is 1300mm High and 720mm Wide and 720mm Deep.
it can integrated various types of equipments,such as power
distribution unit,enverionment monitoring unit,and etc.The cooling
of the cabinet is fan,which is installed on the front door of the
cabinet.It can make sure the temperature stable for the equipment
operating.The cabinet is configured with fully locking doors to
both front and rear faces allowing for access from both sides of
the electrical equipment being integrated.
2. Outdoor Electrical Cabinet Structure
Dimension:720×720×1300mm
The cabinet includes 19” mounting rack from top to down, without
battery tray
The cabinet is made of galvanized steel, single wall, thickness:
1.5mm, without thermal insulation
3. Outdoor Electrical Cabinet Features
(1) The cabinet is dustproof, sunproof, rainproof, rustproof and
theftproof, can be used in outdoor various environment.
(2) High protection level: IP55
(3) Cabinet cooling mode: air conditioner
(4) All the cables used in the cabinet are made from flame
retardant materials.
(5) Including grounding copper bar.
(6) Installation mode: floor mount.
(7) Maintenance mode: accessed from the front.
(8) Cabling mode: routed in and out from the bottom.
(9) All the screws&nuts are stainless steel material with high
anti-corrosion.
(10)Full protection: door sensor, smoke sensor, water sensor and
temperature & humidity sensor, environmental monitoring system
provides real alarm
4. Cabinet Parameters
| Cabinet | Outdoor telecom cabinet |
| Material | Galvanized sheet,single wall. |
| Doors | 1 Front door |
| Door lock | Anti-theft door lock |
| Cable inlet | Cable entry holes are at the bottom of the cabinet |
| Heat insulation | Optional |
| installation | 19” rack |
| Thickness | panel adopt 1.5mm |
| Dimension | 1300H*720W*720D mm |
| Cooling method | 220AC air conditioner cooling system |
| Surface treatment | Painting,plasma electrostatic painting,hot galvanized,powder
coating, polishing,brushing,etc. |
| Mounting method | Floor mounting type |
| Optional accessories | The door sensor, water sensor, smoke sensor, temperature and
humidity sensor |
| Security design | Embedded door, embedded hinges, 3-point security lock |
| IP degree | IP55 |
| Color | RAL7035 |
| Package | Wooden case with pallets |
| Working Temperature | -20~+55ºC |
| Storage Temperature | -40~+65ºC |
5. Technical Specs
(1) Applicable environment conditions:
Operating temperature: -40°C ~ + 55°C
Storage temperature: -50°C ~ + 70°C
Transport temperature: -50°C ~ + 70°C
Relative humidity (RH): 5%~99%
Air pressure: 62kPa ~ 101kPa (similar to 0m ~ 5000m altitude)
(2) Material: good quality galvanized steel
(3) Surface treatment: powder-coat paint, outdoor polyester light
gray RAL 7035 coating
(4) Ingress protection: IP55
(5) Flame retardance: comply with GB5169.7 test A
(6) Insulation resistance: the insulation resistance between
grounding devices and cabinet body parts is not lower than
2×104M/500V(DC).
(7) Withstand voltage: the withstand voltage between grounding
devices and cabinet body parts is not lower than 3000V(DC)/1min.
6. Technics of outdoor equipment cabinet
The cabinet material is high quality steel plate, which is made by
the world's leading AMAD CNC equipment, with exquisite workmanship
and precise size. The main frame of the cabinet is made by welding,
ensuring the whole cabinet is strong and durable. The internal
structure and all kinds of accessories are assembled in the way of
assembling, and the application is flexible. The cabinet body and
its internal accessories are all pretreated by acid washing and
phosphating, and then the special molding powder is used for
electrostatic spraying, so as to prevent corrosion and rust.
7. Cabinet Picture
8. Cabinet inside Rack
9. Our Factory Introduction
Factory Size: 3000 Square Meters
No. of Main Production Lines: 5
Contract Manufacturing: OEM Service Offered, Design Service
Offered, Buyer Label Offered
Production Experience: 10 Year
