industrial Single Cylinder Air Cooling 1700kg Mini Crawler Crane

Micro crawler crane(spider crane)

Specification:

1.95t × 1.75m

Maximum operation radius 5.86m × 0.20t

Maximum ground lift 6.65mx0.55t

Maximum underground lift 10mx1t 20mx1t 40mx0.74t lifting hook lifting speed 0-8m / min

Specification of steel wire rope: Φ 8mm × 50m

Angle / time of boom of rolling device 0-70 ° / 20sec

Track (length × width) 1045mm × 180mm

Specific voltage of grounding 44kpa (0.45 kgf / cm2)

Diesel engine

Type / displacement single cylinder air cooling / 0.441l rated power 8kw / 3600min-1 starting mode electric starting performance - 5 ° C ~ 40 ° C

Fuel / volume Diesel / 5L battery capacity 12V 45ah fuel consumption rate 240g / kw-h noise level rated speed ≤ 80dB (a) (7m)

Wireless remote control and manual operation features, full proportional control and manual proportional control

Vehicle size: length × width × height 2200mm × 600mm × 1600mm

Main engine of vehicle weight: 1700kg standard configuration: manual and wireless proportional remote control (double operation mode), display screen, moment limiter, over winding alarm and automatic stop device, three circle alarm and automatic stop device, automatic hook retracting device, working condition of outrigger, alarm and automatic stop device of outrigger off the ground (or 3-degree inclination of vehicle body), wire rope rope pressure device, three color light, remote control light, walking/ Three mode interlocking system for outrigger / boom

TIANJIN COMMAND MACHINERY MANUFACTURING CO.,LTD Thank you for your attention and support!

    Our company specializes in the production of water well drilling rigs (rotary table, power head), which can meet the requirements of technology: 1 positive mud circulation, 2 reverse mud circulation, 3 air DTH hammer, 4 air lift reverse circulation (without complete crushing, improve drilling efficiency), 5 Hydraulic DTH hammer (without air compressor), engineering drilling rig, agricultural machinery and other mechanical equipment. Committed to providing users with the most suitable equipment for practical use, and has strong design capabilities. Individual product customization can be implemented without any additional charges. We insist on comparing with similar products at home and abroad, and always ensure the advanced nature of our products.

    A good product is not necessarily the most technological and advanced, but it must be the most in line with the actual needs. To make this product, we can not rely solely on designers. We know this well, so we have two groups of design teams for the product. A group of after-sales engineers with more than 30 years of domestic and foreign construction experience, and a group of designers with rich working experience graduated from well-known colleges and universities, which are based on professional division of labor (mechanical design and manufacturing and automation, material forming, mechanical and electronic engineering, manufacturing engineering, etc.). We will combine the rich practical construction experience and the most top professional theoretical knowledge to meet your various needs.

    We are not only familiar with the products, but also familiar with the human environment, construction environment and stratum of domestic and foreign construction areas. We can provide you with all-round product selection suggestions and product customization. To provide you with the greatest technical support to help your cause take off.