Computer Spiral NC Cutter Off Corrugated Carton Box Machine Sheet
Cutter Machine
NC Helical Knife Cutting Machine Introduction
1. Special structural design, excellent mechanical wallboard and
base strength, wallboard with perspective windows.Easy to observe and maintain.
2. The transmission system uses an oil pump to automatically
circulate and lubricate to ensure transmission accuracy.
3. High-precision, high-hardness gear grinding, high speed
resistance, long service life, to ensure accurate meshing of the
tools, and the cardboard is smooth and free of burrs.
4. High-precision cutter shaft, cutter holder design, high-speed
cutting is very smooth.
5. The drive part adopts AC servo drive, Germany Kobe drive,
Shanghai Foton motor, high quality, fast response and accurate
action.
6. The system has an automatic detection function to prevent
equipment loss due to abnormal use and negligence in operation.
7. The computer can automatically adjust the paper cutting
acceleration according to the paperboard specifications and
production speed, and automatically track the paperboard speed to
keep in sync.
8. Raw materials and purchased parts
9. Wall panel and base material on both sides: HT200 casting
10. Upper and lower knife shaft 45 steel
11. Blade material: W18crv5Co5 (high-speed tool steel)
12. Gear material: 20CrMnTi fine grinding and tempering treatment,
grinding accuracy is above 6 grade, small backlash, low noise and
smooth transmission.
Corrugated Board NC Helical Knife Cutting Machine Parameter
| Working Width | 1800mm |
| Design Speed | 150m/min |
| Working Speed | 120m/min |
| Cutting Length | 500mm-9999mm |
| Cutting Precision(uniform velocity) | ±1mm |
| Upper and Lower Knife Shaft Center Distance | φ265mm |
| Main Servo Motor | 30kw |
| Paper Feeding Motor(frequency control the speed) | 3 kw |
| Note: All the rollers are ground and hard chrome-plated (except for
the upper and lower knife shafts) |
Factory Show
