Cassette Type Single Facer Machine Corrugated Board Production Line
Introduction of Single Facer Corrugated Machine
* The card box pulls the type to change the corrugated roller
quickly. The roll time is about 5-20 minutes.
* Corrugated Roller bottom.
* One machine can be shipped with (a. B. C. E. F. g) Multiple-type
* With the fast-changing single group joints of the pipeline are
using fast-changing connectors, easy to operate and fast.
* Fast-changing single group of fixed and separated using lever and
cylinder linkage, stable, simple, accurate positioning.
* Drag the use of 5T hydraulic electric car, time-saving,
labor-saving.
* Each fast-changing single group with a T-type platform, save
space, convenient parking.
* The glue department is independent drive, pulling and locating
pneumatic, convenient for maintenance and cleaning. With the back
out bracket.
* Control automatic speed adjustment of the size of the glue.
* Electric adjustment rubber surface width.
* With a tile paper humidifier, can improve the flatness of
paperboard and production speed.
Single Facer Corrugated Machine Parameter
Sheet width 1800mm Design speed: 150m/min Running speed: 120m/min |
| Name | Configuration | Qty |
SF-LH150 Cassette type Single facer | Cassette type, corrugated roller material: tungsten carbide,
diameter: ￠320mm, change corrugated roller in 10 minutes, frequency motor, electric
adjust gluing width, adjust glue according to speed | 1set |
| Corrugated fast change part | Ø320mm Tungsten Carbide tile corrugated roller, suction hood, tile
sleeve wall panel, swivel joint | 1set |
| Change roller trailer | Hydraulic synchronous lifting, electric traction walking | 1car |
Machine Details
* The guide paper adopts wind absorption to maintain the stability
of corrugated cord type at high speed.
* By the air blower through the vacuum box will be corrugated in
the middle corrugated roller 180 degree range to form negative
pressure zone, to complete the rolling of corrugated.
* Under the Corrugated roller suction groove width of not more than
2mm, can be reduced single-sided corrugated cardboard stripe
traces.
* The transmission department adopts synchronous Belt drive,
isolating the vibration source, making the transmission more
stable, running reliably and maintaining higher.
Packaging&Shipping
