Introduction
This distribution box terminates outside optical cables with up to
8 fibers; it allocates 8 adapters for connecting with max 8 drop
cable pigtails, it is also suitable for using with mini splitters.
The box works under both indoor and outdoor environments. It is a
perfect cost-effective solution-provider in the FTTH networks.
FTTH Box Our terminal box is available for the distribution and
terminal connection for various kinds of optical fiber system,
especially suitable for mini-network terminal distribution, in
which the optical cables, patch cores or pigtails are connected.
Characteristics
1) Water-proof design with IP-66 Protection level.
2) Integrated with splice cassette and cable management rods.
3) Manage fibers in a reasonable fiber radius condition.
4) Easy to maintain and extend the capacity.
5) Fiber bend radius control more than 40mm
6) Suitable for the fusion splice or mechanical splice
7) 1*8 Splitter can be installed as an option.
8) Efficient cable management
9) 8 ports cable entrance for drop cable.
Applicance
This distribution box terminates outside optical cables with up to
8 fibers; it allocates 8 adapters for connecting with max 8 drop
cable pigtails, it is also suitable for using with mini splitters.
The box works under both indoor and outdoor environments. It is a
perfect cost-effective solution-provider in the FTTH networks.
Installation:Wall hanging:
1 According to the backplane mounting hole’s distance, hit 4
mounting holes on the wall, and knock the plastic expansion sleeve.
2 Fixed the box on the wall with M8 * 40 screws.
3 Position the upper end of the box into the wall hole, and then
use M8 * 40 screws fix the box on the wall.
4 Check the box installation, close the door after qualified. In
order to prevent rainwater from entering the box, the box should be
tightened by a key column.
5 Insert the outdoor optical cable and butterfly type optic cable
according to the construction requirements.
