380V, 50/60 Hz
Modular design, easy assembly
Enclosure: Max. IP40
CCC,ISO9001,GB7251,IEC439
Send us your SLD (Single Line Drawing) or requirements, we design
the switchgear plan for you
General
The XL21 power distribution cabinet product is an indoor enclosed
power distribution box. The box body is made of thin steel plate by
bending and welding. The front side is a single left-opening door.
The door is equipped with measuring instruments such as voltmeter
and ammeter, operating appliances, signal appliances, etc. It is a
kind of power with a simple structure, reliable operation and low
cost. Power distribution device.
XL-21 mobile power cabinet, used for AC 50Hz, rated working voltage
of 380V (660V), rated working current of 630A, used for metallurgy,
mining, petroleum, chemical, electric power, building materials,
mechanical processing, transportation, hotels, restaurants, etc. It
is used for power distribution and open distribution of the phase
four-wire power system. It protects the circuit from overload,
short circuit and leakage, and performs normal conversion of the
circuit. This product is an indoor closed device, and its enclosure
protection level is IP40. The product complies with Standards such
as GB7251.1 and IEC60493-1.
Working environment:
1. Ambient temperature: -5 ℃ ~ + 40 ℃, and the average temperature
within 24h does not exceed + 35 ℃.
2. Altitude: not exceed 2000m.
3. The ambient air temperature of + 40 ℃ is not more than 50%; at
lower temperatures can have a higher relative humidity (eg: + 20 ℃
at 90%), taking into account the change in temperature that allows
the generation of a moderate condensation.
4. Equipment installation and the vertical gradient should not
exceed 5 °
5. Equipment should be installed in the absence of severe
vibration, shock-free, and corrosion-free place
6. Note: More than the above conditions can be negotiated with the
company.
