PVC Sleeve Machine Bottle Shrink Sleeve Labeling Machine Automatic
PVC Sleeve Shrink Wrap Labeling machine
Facility character:
Whole machine adopt qualified stainless steel and good-quality of
aluminum alloy , compact and reasonable fracture,convenient to
adjust；
The label roll frame of shrinkage film with adjustable device,
convenient to adjust according to differ
volume label 5″~10″paper tube.
Simply installation, then can convenient for square and round
bottle.
No need of instrument, rotary mechanism is convenient to adjust,
apply to different bottle type.
Unique sleeve labeling method, adopt pressing sleeve labeling
method, not only convenient but also reasonable.
Control the feeding system automatically, and flat the shrinkage
film and adjust strain simultaneity.
Unique design knife plate, in the determined range, can change the
knife base. Knife changing quickly and conveniently.
Middle guide-pole clip system, mould changing quickly, no need any
instrument.
Label location system, can promote and demote in-phase adjust
location according to specific bottle type requirement.
Imported servo system and high-sensitivity photoelectric from
Japan, with high cutting precision of label. Stainless steel
electric control cabinet, Panasonic PLC, imported from Japan.
Adopt advanced man-computer Interface auto controlling technology,
key electric component all adopt international famous industrial
brand.
Technical parameters
| Type | GS-250 |
| Voltage | AC220V |
| Sleeve labeling machine power | 3KW |
| Production capacity | ≥200 bottles/min (label height ≤100 mm) the higher the label is, the lower the production capacity is. |
| Sets of standard pass rate | ≥98% |
| The entire line of production efficiency | ≥95% (in 24-hour calculation) |
| Diameter of bottle | Φ28mm ~ φ 125mm, special sizes can be extra design |
| Bottle height | 30 mm -280 mm,special height can be extra design.. |
| For label | PVC,PET,OPS |
| Label length | 30mm ~250mm |
| Label thickness | 0.035mm ~0.13mm |
| Label matherials | PVC,PET,OPS |
| label transparent spacing | ≥5 mm |
| Label paper core diameter | ≥5''(127mm) |
| OD label | ≤500mm |
| Sleeve labeling machine Host Dimension | L1550mm×W1055mm×H2000mm |
Label shrink tunnel
It has an even shrinking. The distribution of Iow-pressure steam
drum and spouting way of steam are uniform and designed with
seamless tube. The nozzle is divided to be adjustable three
segments and the height, position and steam output of every segment
can be adjusted respectively so as to gain the perfect shrinking
effect. The whole machine is made of stainless steel with heat
preservation, which not only saves energy, but also complies with
the international safety standard. The stainless steel defrosting
tray collects condense water. The whole machine adopts the
water-proof design with the
convenience of easy operation and low maintenance.
steam generator
Technical parameter
Rating steam volume: 0.042t/h Rating working pressure:0.7Mpa
Saturation steam temperature: 170℃ Input power: 18KW
Input current:41A
Characteristics:
1) Full Face Stainless Steel hosts: the whole machine is not
waterproof rust;
2) Adjustable cutter head: original cyclotron cut, double-sided
blade, long life;
3) Single positioning center guide pillar: Tag channeled more
stable;
4) synchronized dividing device: bottle feeding is more stable;
5) Label brush under Group: sets of standard precision is more
accurate;
6 ) label control electric eye shelf: unique combination of tail and
electric eye, improve membrane material cutting
accuracy; push-button control box: Operating more humane;
7) formula feeding rack: the freedom to choose rack position.
8) Electrical Appliance Configuration Specification
9)Adopted PLC programmable controller, imported servo motor, servo
drives, inverters and sensors, in addition
to using a set of standard positioning module for accurate, fast
and stable.
10) applicable set of standard varieties of type:
A variety of bottles, such as: round bottle, square bottle, flat
bottle, curved bottle, cup and so on.
