DORIN INVERTER CO2 R744 Heat Pump Systems Multi Power

Description of DORIN INVERTER CO2(R744) Heat Pump Systems – for both Practical and Cost-Saving Benefits

The compressor sucks low-temperature and low-pressure gaseous carbon dioxide refrigerant from the evaporator, and compresses the carbon dioxide refrigerant into a high-temperature and high-pressure supercritical fluid through work. The high-temperature and high-pressure supercritical fluid enters the gas cooler to exchange heat with water, and is cooled in the gas cooler. The high-pressure fluid releases a lot of heat, and the water absorbs the heat released and the temperature continues to rise. After the high-pressure fluid is throttled and depressurized by the expansion valve, it absorbs heat from the surrounding air and evaporates into low-pressure gas through the action of the fan in the evaporator, and is sucked into the compressor to be compressed, and the cycle is repeated to produce hot water. Features Natural environmental protection refrigerant: ODP is 0, GWP is 1, no pollution to the environment, non-toxic, non-flammable Excellent high-temperature heating performance: the highest water output can reach above 90℃ Excellent low temperature performance: at -20°C ambient temperature, 90°C high temperature hot water can still be produced High efficiency: the heating performance COP can reach 4.5, and when the hot water is produced at low temperature, the COP is still above 2.0 Wide range of application: it can work normally in the ambient temperature range of -20℃~43℃, suitable for our production of domestic or industrial hot water

Performance of DORIN INVERTER CO2(R744) Heat Pump Systems – for both Practical and Cost-Saving Benefits

Ultra-low temperature working conditions: ambient temperature DB-10-C, water inlet temperature 9°C;
Defrost condition: ambient temperature DB2°C/WB1°C, water inlet temperature 9°C; low temperature condition: ambient temperature DB7°C/WB6°C, water inlet temperature 9°C; standard working condition: ambient temperature DB20°C /WB15°C, inlet water temperature 15°C; high temperature working condition: ambient temperature DB38°C/WB23°C, inlet water temperature 29°C.
Installation Notes:
1. The spacing around the installation must not be less than Im;
2. The pipelines other than the heat pump should be protected from frost and heating elements can be installed;
3. Heat insulation and protection measures should be taken for the pipelines for hot water circulation to prevent heat loss.

Application Diagram Pressure-bearing water tank

DORIN INVERTER CO2(R744) Heat Pump Systems – for both Practical and Cost-Saving Benefits

System Diagram Smart Control System

DORIN INVERTER CO2(R744) Heat Pump Systems – for both Practical and Cost-Saving Benefits

System schematic diagram

As one of the largest heat pump manufacturers in China, Leomon produces a wide range of air source heat pumps for residential and commercial applications, including:

* CO2 heat pumps
* High-temperature heat pumps
* Inverter heat pumps
* Pool heat pumps
* Heat pump water heaters
* Ground-source heat pumps

Our heat pumps comply with international standards such as EN14511 and EN14825, and hold comprehensive certifications including CE, ErP, Keymark, MCS, CB, and SAA.

Leomon boasts three major production bases, 35 automated production lines, and 25 international laboratories accredited by TÜV Rheinland, Intertek, SGS, and Kiwa, with a total annual production capacity exceeding 1.5 million units.

With heat pump solutions certified to global standards and an extensive sales network, Leomon's heat pumps are sold in over 60 countries, including Europe, North America, Australia, and Asia.