Filling Machines For Beverage Juice Industries Juice Bottle Filling
Machine
The filling machine is mainly designed for filling hot temperature
liquid into glass bottle; For example juice, tea drinks etc which
are made of concentrate juice. The final filling temperature will
be around 85-90 degree centigrade; Once the thermal meter in juice
filling machine is lower than the temperature, juice will be return
to sterilizing machine again through return system.
Glass bottle juice filling machine is different from plastic
bottle. It will be optional and suggested to apply 4 in 1 filling
machine, one more washing system is adopted to warm up the glass
bottle in advance.
Flip the bottle holder, the bottle holder clamps the bottleneck
position, avoids the rubber clamp block on the traditional bottle
holder to cause the possible pollution to the bottle mouth thread
position. Bottle clamp is made of stainless steel AISI304, sanitary
and durable.
meet the requirements of hot filling and filling (the liquid level
is controlled at about 15 mm, and the level level can be
fine-tuned), so as to minimize the return flow of the material,
thus providing hardware guarantee for ensuring the flavor of the
product.
Capping Part
The capping system applies advanced French technology,when clamp
the cap will screw immediately and magnetic torque type capping
head
Cap loading machine
Pre-process system.
1 High-shear emulsifying tank + Plate heat exchanger 2 Mixing tank
3 UHT sterilizer + homogenizer machine + Buffer tank 4 Hot water
system + Hot water tank 5 CIP cleaning system.
Bottle Inverter Chain
1/Use juice own high temperature to kill the bacterial inside cap.
2/Use juice own high temperature to improve sealing of bottle to
extend warranty time. 3/Use SUS 304/316 stainless steel chain and
high polymer material conveyor to keep high quality and increase
service life.
Shower Cooling Machine.
1/Mainly for cooling and sterilization 2/The main parts of the
machine are made of stainless steel, the top is designed to be
openable for easy maintenance and observation 3/Nozzles are
manufactured using U.S. technology and spray water evenly
4/Conveyor belt adopts Rexnor technology, flat surface with small
wear 5/Smooth and reliable operation with low energy consumption
We suplly Free Factory Layout design
We suplly Free Bottle Shape design
Water treatment system
Labeling Machine
Laser date printer
PE film wrapping package machine
Customer Photos
After Sales Service
1. Installation, debug
After equipment reached the workshop of customer, place the
equipment according to plane layout we offered. We will arrange
seasoned technician for equipment installation, debug and test
production at the same time make the equipment reach the rated
producing capacity of the line. The buyer need to supply the round
tickets and accommodation of our engineer, and the salary.
2. Training
Our company offer technology training to customer. The content of
training is structure and maintenance of equipment, control and
operation of equipment. Seasoned technician will guide and
establish training outline. After training, the technician of buyer
could master the operation and maintenance, could adjust the
process and treat different failures.
3. Quality guarantee
We promise that our goods are all new and not used. They're made of
suitable material, adopt new design. The quality,
specification and function all meet the demand of contract. We
promise that the products of this line could storage for one
year without adding any aseptic.
4. After sales
After checking, we offer 2 yearsas quality guarantee, free offer
wearing parts and offer other parts at the lowest price. In
quality guarantee, the technician of buyers should operate and
maintain the equipment according to seller's demand, debug some
failures. If the problems are still can not solve, we will arrange
technician to your factory solving the problems. The cost of
technician arrangement you could see the cost treatment method of
technician. After quality guarantee, we offer technology support
and after sales service. Offer wearing parts and other spare parts
at favorable price; after quality guarantee, the technician of
buyers should operate and maintain the equipment according to
seller's demand, debug some failures. If the problems are still can
not solve, we will arrange technician to your factory solving the
problems.automatic water filling machine video
