large industrial fan
Introduction
Our large industrial fans achieve volumetric flow rate of up to
1,000,000 m³/h and pressures of up to 75,000 Pa and the standard
version is designed for temperatures of -40°C to +750°C. Depending
on the
application, we produce customer-specific centrifugal and axial
fans and our experienced ventilation technology experts give you
personal advice and support.
Advantages and Features
1. Centrifugal Flow Blower Fan can output higher outlet pressure and provide more gas flow with
lower noise. Ability to work stably at higher media temperatures.
2. Customized design according to customer's performance
requirements, and optimized by CFD technology, the energy
consumption is lower than similar models.
3. The airflow channel and the impeller have been optimized several
times, which is more efficient and energy-saving than ordinary
large-flow fans.
4. For the material of impeller and main shaft, we will choose
high-strength carbon steel, low-alloy steel, high-temperature alloy
steel, high temperature resistant high-strength alloy steel for
different working conditions temperature and working speed, so that
the impeller and main shaft can still maintain a reliable strength
at high temperature.
5. For dust-containing gas, we can meet various working conditions
from a small amount of dust to a very large dust content. After
special treatment, the surface hardness of the blade can reach
HRC60~70, which can extend the life of the impeller by more than 3
times.
6. The Centrifugal Flow Blower Fan impeller is subjected to high standard dynamic balance correction
to ensure stable operation of the fan.
7. The Centrifugal Flow Blower Fan system adopts a detachable design, which greatly reduces the
transportation cost of customers.
8. Each part has an installation number and can be successfully
assembled under the guidance of the installation manual.
9. Provide on-site installation guidance services.
