Beef Skin Dog Bone Making Machine
Product Description
Rawhide Knotted Bone Chewing Pet Food Equipment can produce pet
chewing bone with cowhide, pigskin, beef tendons or sheepskin as
material. It could press the material to be various shapes and
sizes.
Member of APPA,USA
Deputy President Unit of SDPIA
A High-Tech Enterprise of Shandong Province
Supplier of Kellogg’s of USA,Bill & Melinda Gates Foundation,
Wanpi, a public corp of China
1. It is a type of Flour Column and Three Board, the upmost output
tonnage can be adjustable.
2. It can be adjusted among the range of 5t-60t according to the
different products’ procedures, the purpose is to arrive at the
best-required output.
3. Well, our MK-60T Pressing Machine has two types, manual
operation, and automatic operation, meanwhile, it can count and
timing automatically, safe and protective.
4. In addition, our MK-60T Pressing Machine’s middle plate and
lower plate open two-article T-slot respectively, the pressure
system is rear-mounted and the below equips with the horizontal
floor mat.
5. After pressing, the mold plate can be moved outside, so that it
could well protect the operator’s safety.
6. Machine with good safety design. While the workers place the
materials or take out the final product, the bottom mold can be
moved outward, so the workers are not under the upper mold. Only
after the worker leaves the machine, the machine should be allowed
to start by pressing the two palm buttons.
7. Equipped with PLC and touch screen to realize easy control.
Different languages can be input as a requirement (standard
language is Chinese and English).
Features
1. It is a type of Flour Column and Three Board, the upmost output
tonnage can be adjustable.
2. It can be adjusted among the range of 5t-60t according to the
different products’ procedures, the purpose is to arrive the best
required output.
3. Well, our MK-60T Pressing Machine has two types, manual
operation and automatic operation, meanwhile, it can count and
timing automatically, safe and protective.
4. In addition, our MK-60T Pressing Machine’s middle plate and
lower plate open two-article T-slot respectively, the pressure
system is rear-mounted and the below equips with horizontal floor
mat.
5. After pressing, the mold plate can be moved outside, so that it
could well protect the operator’s safety.
Factory & Office
Commissioning Service
1. We make accurate factory layout design according to customer’s
factory size; if the customer needed, we could make workshop design
with electricity power, water supply, gas power, material storage,
final storages, worker’s restroom, etc.
2. After delivering machines to client’s factory, we start to apply
for the Visa to client’s country immediately; normally the vessel
needs 20-60 days to the required port, so we have enough time to
get the Visa. While the machines arrives your factory, our
engineers are ready to start for the commissioning service.
3. 1-2 of our engineers will go to your factory to install and
adjust the processing line to realize normal production at shortest
time.
4. Our engineers have responsibility to train and teach the workers
how to operate, clean, maintain and repair all the machines, until
the workers could well operate the processing line.
5. It normally costs 10 days for the commissioning
service, and we supply 1 year guarantee from the date of completion
of commissioning service.
6. The engineer’s round-trip flight tickets, accommodation and
daily salary USD 60 are on client’s account.
