Stainless Steel Pressed Rawhide/Fish Skin Bones Maker Machinery
Why do dogs need to grind their teeth?
You may have noticed that teeth grinding is one of the dogs'
favorite pastimes. Whether it is domestic dogs or their ancestor
wolves, they not only like to grind their teeth by nature, but also
use their mouths to pick up objects to feel their touch and taste,
so as to explore their surroundings.
This is an antidote to boredom and stress-boredom and stress or
anxiety usually trigger people to bite their nails. This may be an
unconscious reaction that you didn't even notice until it was too
late and the nails had been bitten. For dogs, chewing on anything
available can have a similar effect. Dogs that have been
under-stimulated physically or mentally for a long time may grind
their teeth more than well-exercised dogs and therefore will be
calmer.
Product Description
Rawhide Pet Bone Pressing Machine with ISO9001 is type of Flour
Column and Three Board, the upmost output tonnage is 20t.
It can be adjusted amon the range of 5t-20t according to the
different products’procedures, the purpose is to arrive the best
required output. Cylinder Stroke is 200mm, (slide stroke is 200mm).
And the dimension of effective working surface is 500mm*400mm, the
close height is 200mm. Well, our MK-20T Pressing Machine has two
types, manual operation and automatic operation, meanwhile, it can
count and timing automatically, safe and protective.
In addition, our MK-20T Pressing Machine’s middle plate and lower
plate open two-article T-slot respectively, the pressure system is
rear-mounted and the below equips with horizontal floor mat.
Features
Rawhide pressed bones making machine could produce pet chewing bone
with cowhide, pigskin or sheepskin as material. It could press the
material to be various shapes and sizes.
Machine Picture
Technical Parameters
Project | MK-20T |
Liquid Pressure of Work (MPa) | 14-21 |
Theory Output (Ton)
| 5-20 |
Working surface size (mm)
| Left and Right 500 |
|
Working surface size (mm) |
|
Front and Back 400 |
Height of Working Table Off the Ground(MM) | 780 |
Biggest Operational Height(mm) | 400 |
Close(mm) | 200 |
Cylinder Stroke(mm)
| 200 |
Motor Power | 5.5KW |
Structural Style | Flour Column Three Board |
| Above Oil Cylinder |
Power source
| 380VAC,50/60Hz |
Weight | 1108kg |
Dimension | 600*500*1780mm |
Commissioning Service
a. Consultation service before, during, and after sales;
b. Project planning and design service;
c.Debugging of equipment until everything is functional;
d. Management of equipments' long distance shipping from seller's
factory to the named place by buyer;
e.Training of equipment maintenance and operating personally;
f. New production techniques and formulas;
g. Provide 1 year complete warranty and life-time maintenance
service.
