Rawhide Pet Bone Pressing Machine with ISO9001 is type of Flour
Column and Three Board, the upmost output tonnage is 20t.
It can be adjusted amon the range of 5t-20t according to the
different products’procedures, the purpose is to arrive the best
required output. Cylinder Stroke is 200mm, (slide stroke is 200mm).
And the dimension of effective working surface is 500mm*400mm, the
close height is 200mm. Well, our Pressing Machine has two types,
manual operation and automatic operation, meanwhile, it can count
and timing automatically, safe and protective.
In addition, our Pressing Machine’s middle plate and lower plate
open two-article T-slot respectively, the pressure system is
rear-mounted and the below equips with horizontal floor mat.
Features
Rawhide pressed bones making machine could produce pet chewing bone
with cowhide, pigskin or sheepskin as material. It could press the
material to be various shapes and sizes.
Machine Picture
Technical Parameters
Project | MK-60T |
Liquid Pressure of Work (MPa) | 14-21 |
Theory Output (Ton) | 5-20 |
Working surface size (mm) | Left and Right 500 |
|
Working surface size (mm) |
|
Front and Back 400 |
Height of Working Table Off the Ground(MM) | 780 |
Biggest Operational Height(mm) | 400 |
Close(mm) | 200 |
Cylinder Stroke(mm)
| 200 |
Motor Power | 5.5KW |
Structural Style | Flour Column Three Board |
| Above Oil Cylinder |
Power source | 380VAC,50/60Hz |
Weight | 1108kg |
Dimension | 600*500*1780mm |
Commissioning Service
1. We make accurate factory layout design according to customer’s
factory size; if the customer needed, we could make workshop design
with electricity power, water supply, gas power, material storage,
final storages, worker’s restroom, etc.
2. After delivering machines to client’s factory, we start to apply
for the Visa to client’s country immediately; normally the vessel
needs 20-60 days to the required port, so we have enough time to
get the Visa. While the machines arrives your factory, our
engineers are ready to start for the commissioning service.
3. 1-2 of our engineers will go to your factory to install and
adjust the processing line to realize normal production at shortest
time.
4. Our engineers have responsibility to train and teach the workers
how to operate, clean, maintain and repair all the machines, until
the workers could well operate the processing line.
5. It normally costs 10 days for the commissioning
service, and we supply 1 year guarantee from the date of completion
of commissioning service.
6. The engineer’s round-trip flight tickets, accommodation and
daily salary USD 60 are on client’s account.
