Automatic Moving Vehicle Rail For Low Voltage Assembly Line cart
Product Introduction
BDG series rail powered transfer vehicle get its power from
railway. The 380V alternating-current is transformed into safe
current 36V. The current collectors mounted on trolley get the 36V
current from the railway and transmit it into electronic box and
thus to make the car start, stop, move forward and move backward.
Combined with PLC system, full automatic operation is available.
It's widely used, life long, safe and flexible.
Application Site
Steel Mill & Coil Plant
The rail push transfer car can be applied in steel mill to handling
steel pipes and coils and it can lift up or put down the coils
freely with hydraulic lifting table. And the V- frame can be added
on the deck to prevent the coils falling down. To ensure safety,
the rail push transfer cart can be operated by the wireless
control. We can make a suitable V-frame to you according to the
coil dimension, coil weight, etc.
Warehouse & Logistics
The rail push transfer cart can be used to transfer heavy material
from one warehouse to another or from warehouse to factory. For
example, it can transfer paper coils in paper mill and transfer
large package to another place. Due to it can travel in all kinds
of rails with automatically operate, it can greatly improve the
working efficiency.
Petroleum industry
With influence of the length on oil pump and sucker rods, the table
size of the rail push transfer cart is large than common cart. With
box girder structure, it cannot deformation with large load
capacity. It can applied in all kinds of conditions, and mainly
used to transfer oil pump, parts and finished products between
workshops.
Advantage
Maybe you will have a consideration before buying a car, I
recommend you our products to you strongly for the following
reasons:
Low noise
It's powered by electric devices, so when you are operating it, you
can't feel much noise. It causes low noise level and give workers a
good working environment.
Maximum safety
We always try our best to make sure the safety of the operators and
the material handled. We do care the safety of everyone involved in
the job.
Easy for operation
Our vehicles are easy to drive, so as soon as you get it you will be
able to use it to transport your loads. We will support you to make
the best by using our products.
Technical Parameters
| BDGZ SERIES TRANSFER CART TECHNIAL PARAMETER TABLE |
| Model | BDGZ-2t | BDGZ-16t | BDGZ-30t | BDGZ-50t |
| Rated Load(t) | 2 | 16 | 30 | 50 |
| Table Size (mm) | Length(L) | 2000 | 4000 | 4500 | 5500 |
| Width(W) | 1500 | 2000 | 2200 | 2500 |
| Height(H) | 450 | 500 | 600 | 650 |
| Wheel Base(mm) | 1200 | 2800 | 3200 | 4200 |
| Rail Inner Gauge(mm) | 1200 | 1435 | 1435 | 1435 |
| Wheel Diameter(mm) | 270 | 350 | 400 | 500 |
| Wheel Quantity | 4 | 4 | 4 | 4 |
| Ground Clearance(mm) | 50 | 50 | 50 | 50 |
| Running Speed(min) | 0-25 | 0-20 | 0-20 | 0-20 |
| Motor Power(kw) | 1 | 2 | 3.5 | 5 |
| Transformer Power(KVA) | 3 | 6.8 | 10 | 20 |
| Transformer Quantity | 1 | 1 | 1 | 1 |
| Running Distance(m) | 70 | 70 | 70 | 50 |
| Max Wheel Load(KN) | 14.4 | 64.5 | 174 | 343.8 |
| Reference Weight(t) | 2.8 | 5.5 | 8 | 14.6 |
| Recommended Rail Model | P15 | P24 | P43 | QU100 |
Packing & Shipping
The length of the transfer car is less than 6m while the width is
less than 2.2m it will be transported by 20ft container.
If the length of the transfer car is longer than 5.9m and less than
12m, it will be transported by 40ft container. If the quantity is 2
sets or 3 sets, they can be transported by full container. If the
quantity is 1 set, it can be transported by LCL Container.
If the length of the transfer car is less than 12m, the width is
beyond 2.2m. It needs to be transfer by flat rack (20 or 40 ft). If
the equipment is beyond above dimension, and quantity need to
consider bulk cargo.
Why Choose Us?
The load bearing safety factor of the rail push transfer cart is no
less than 120%.
The auxiliary device or foundation drawing is designed for free and
we offer the technical service
16 hours engineering service and 24 hours internet service
During the warranty period, if our rail push transfer cart can't
work normally, we can support you repair technology or replace
relevant parts for you within 24 hours
Solving the quality problem within 24 hours, serious attitude from
beginning to end.
