motorized trackless transfer car for mold and die material handling
equipment
The BWP series motorized trackless transfer car for mold and die material handling
equipment usually,accumulator,mains powered and generator are choose as power
source.The current is supplied and generator are choose as power
source.The Electric Trackless Transfer Flat Car is supplied to pulling motor through electric control system,which
makes the motorized trackless transfer car for mold and die material handling
equipment start,stop,move background,turn around and realize other
functions.Also, we will provide intelligent automatic rapid charger
with the car. Positioning fixture, lift platform and other
assistive device are optional to meet different demands on various
occasions. The PLC is also alternative if The motorized trackless transfer car for mold and die material handling
equipment is necessary.
Advantages and functions of the motorized trackless transfer car for mold and die material handling
equipment
1.motorized trackless transfer flat car overall solution vendor
2.The wheels of motorized trackless transfer flat carcan turn to
180 degrees.
Accurate location of 3.motorized trackless transfer flat car 3cm
Safety guarantee equipment running in place
4.motorized trackless transfer flat car conforms to JB / T6127-92
mechanical industry standard, and puts forward environmental
protection and economic use plan to the society.
5.motorized trackless transfer flat car has compact structure,
beautiful appearance, steady turning, strong climbing ability and
long distance.
6.motorized trackless transfer flat car low noise, easy to maintain
environmental protection power supply mode, positioning remote
control operating steel structure skeleton, safety factor 150, load
up to 300t
Detailed Image of motorized trackless transfer car for mold and die material handling
equipment
The motorized trackless transfer car for mold and die material handling
equipment consisted of power source,gear train,steel structure bearing
frame,steering gear,running gear,control system and fault diagnosis
module to better the Electric Trackless Transfer Flat Car.
Technical parameter table of motorized trackless transfer car for mold and die material handling
equipment
| Rated Load(T) | 5 | 10 | 15 | 20 | 30 | 40 | 50 |
| Ground Clearance(mm) | 50 | 50 | 50 | 50 | 50 | 50 | 50 |
| Wheel Base(mm) | 1500 | 1500 | 1500 | 1700 | 1700 | 1800 | 1800 |
| Turnning Radius(mm) | 2501 | 3101 | 3401 | 3901 | 4301 | 4801 | 5201 |
| Axles Distance(mm) | 2500 | 3100 | 3400 | 3900 | 4300 | 4800 | 5200 |
| Motor Power(Kw) | 3.5 | 5 | 6 | 7 | 10 | 12 | 15 |
| Running Speed(m/min) | 0-15 | 0-15 | 0-15 | 0-15 | 0-15 | 0-12 | 0-12 |
| Cart Weight(t) | 4.3 | 5.3 | 6.6 | 7.9 | 8.8 | 10 | 10.5 |
| Impacted Rated Load(t) | 7.5 | 15 | 22.5 | 30 | 45 | 60 | 75 |
| Battery Capacity(Ah) | 180 | 160 | 180 | 180 | 250 | 300 | 330 |
| Battery Voltage(v) | 36 | 48 | 48 | 48 | 48 | 48 | 48 |
| Wheel Quantity | 4 | 4 | 4 | 4 | 44 | 4 | 4 |
| Ground Requirement | Cement Floor | Cement Floor | Cement Floor | Cement Floor | Cement Floor | Cement Floor | Cement Floor |
Application of the motorized trackless transfer car for mold and die material handling
equipment
Stable and flexible during the turning in small space, we have
optimized the steering mechanism, wheel press and frame rigidity to
make it available for linkage of several trolleys. The Electric Trackless Transfer Flat Car-30T Capacity Towable Type Trackless-Industrial Trailer Coils and
Die Industrial use Motorized Rail Die Transfer Carts has been highly approved by our customers.
