Bent Anchor Bolts
L-Shaped Anchor Bolt (90 Degree Bend) Custom Anchor Bolts with HDG
L-shaped Anchor Bolts
Anchor bolts are commonly used in the construction and engineering
industries to attach objects or structures to concrete. L-Shaped
Anchor Bolts (masonry anchors) vary in shape, size and material,
depending on the specific application, however they all consist of
a threaded end where a nut and washer can be attached for the
external load.
Custom Anchor Bolts
ZHONGYUE carries a great selection of standard bolt sizes, from
3/8” diameter to 5/8”, and lengths from 6” to 18”, however we
specialize in providing our customers with custom anchor bolts
manufactured to your specs. For your custom anchor bolts, we’re
able to offer diameters ranging from 3/8” to 4” in grades 36, 50,
55 & 105. Whether you need plain, zinc, hot dipped galvanized, 303
or 316 stainless steel, ZHONGYUE is able to meet your specific
requirements.
Application:
Railway, Mining, Bridge, Boat, Construction etc.
Specifications:
Grade:4.6/4.8/5.6/5.8/8.8/10.9/12.9
Dimensions: 5/8" ,3/4" ,7/8", 1", 1 1/8",1 1/4",1 3/8",1 1/2", 1
5/8", 1 3/4", 1 7/8", 2"
Custom bent bolts are typically dimensioned as follows:
Diameter (D) x Length (L) x Leg distance (C) x Thread (T)
| Brand | ZhongYue |
| Name | Anchor bolt |
| Type | HS26/HS32 |
| L Type, Y Type, J Type |
| Or the type by customers’ drawings |
| Grade | 4.6 | 5.6 | 8.8 | 10.9 |
| Material | Q235 | 35# | 45# | 40Cr |
| Mechanical properties | Tensile strength: ≥400Mpa | Tensile strength:≥500Mpa | Tensile strength:≥800Mpa | Tensile strength:≥1000Mpa |
| Yield strength:≥240Mpa | Yield strength:≥300Mpa | Yield strength:≥640Mpa | Yield strength:≥900Mpa |
| Elongation:22%min | Elongation:20%min | Elongation:12%min | Elongation:9%min |
| Cold bending: 90 degree without crack | Cold bending: 90 degree without crack | Cold bending: 90 degree without crack | Cold bending: 90 degree without crack |
| Surface | plain (oiled), Oxide black, Zinc, HDG, wax, bitumen, Dacromet,
Sherardizing |
| Standard refers | UIC864-2 |
Production Procedure
Raw material —— Wire drawing —— Cutting the wire rod —— forming the
head —— cutting Edge —— Heat Treatment —— Surface treatment ——
Final inspection —— Packaging —— Delivery
Inspection machine
1. Brinell Hardness Tester
2. Carbon and Sulfur Analyzer
3. Rockwell Hardness Machine
4. Automatic Impact Testing Machine
5. Metallographic Microscope
6. Automatic High-speed Analyzer
7. Fatigue Testing Machine
8. Metallographic Specimen Polishing Machine
9. Metallographic Specimen Pointing Machine
L-Shaped Anchor Bolt (90 Degree Bend)
Inspection during the production process
How is the quality control of ZhongYue rail clips?
We own a full set of strict quality control system to produce rail
clips, from raw material purchasing till the finished clip
application. There’s a professional inspection team to check about
each process of the production line and every two hour out of the
line.
Inspection machine for finished rail clips.
What does ZhongYue use to inspect the finished rail clips?
- Brinell Hardness Tester
- Carbon and Sulfur Analyzer
- Rockwell Hardness Machine to test metallic materials
- Automatic Impact Testing Machine
- Metallographic Microscope
- Automatic High-speed Analyzer
- Fatigue Testing Machine
- Metallographic Specimen Polishing Machine
- Metallographic Specimen Pointing Machine
Zhongyue's products ranges:
- Rail Fastening system
- Rail Sleeper Screw
- Rail Spike/Track spike/ Dog spike
- Railway Bolt
- Elastic Rail Clip
- Rail Shoulder
- Rail Anchor
- Rail Tie Plate
- Rail Clip
- Railway Washer
- Rail Nylon Insulator
- Rail Pad
- Rail Plastic Sleeve
- Rail Fish Plate
- Brake Block
- Rail Nuts
- Rail Fastening System
- Crane rail
