48 Port POE Switch Full Gigabit 52-port L2+ Managed with 48*
10/100/1000M RJ45 and 4*100/1000M SFP Fiber Ports
Technical Parameter
| Interface Characteristics |
| Fixed Port | 48*10/100/1000Base-T PoE ports (Data/Power) 4*100/1000Base-X uplink SFP slot ports(Data) 1*RS232 console port(115200,N,8,1) |
| Ethernet Port | Port 1-48 can support 10/100/1000BaseT(X) auto detect, full/half
duplex MDI/MDI-X adaptive |
| Twisted Pair Transmission | 10BASE-T: Cat3,4,5 UTP(≤100 meter) 100BASE-TX: Cat5 or later UTP(≤100 meter) 1000BASE-T: Cat5e or later UTP(≤100 meter) |
| SFP Slot Port | Gigabit SFP optical fiber interface, default matching optical
modules (optional order single-mode / multi-mode, single fiber /
dual fiber optical module. LC) |
| Optical Cable/ Distance | Multi-mode:850nm / 0~500M (1.25G), Single-mode:1310nm / 0~40KM, 1550nm / 0~120KM. |
| Chip Parameter |
| Network Management Type | L2+ |
| Network Protocol | IEEE802.3 10BASE-T, IEEE802.3i 10Base-T,IEEE802.3u 100Base-TX IEEE802.3ab 1000Base-T, IEEE802.3z 1000Base-X, IEEE802.3x |
| Forwarding Mode | Store and Forward(Full Wire Speed) |
| Switching Capacity | 368Gbps (Non-blocking) |
Forwarding Rate@64byte | 77.38Mpps |
| CPU | 750MHz |
| DRAM | 1G |
| FLASH | 256M |
| MAC | 16K |
| Buffer Memory | 12M |
| Jumbo Frame | 10K |
| LED Indicator | Power: PWR (Yellow), System: SYS (Yellow), Network: Link/Act (Yellow), PoE: PoE (Green), Fiber port: L/A(Green) |
| Reset Switch | Yes, One-button factory reset |
| PoE & Power Supply |
| PoE Port | Port 1 to 48 |
| PoE Management | PoE working status Delay start of power supply PoE output priority configuration Scheduling of PoE operation and time Total power limit of PoE power supply PoE output power allocation, off& af &at |
| Power Supply Pin | Default 1/2 (+), 3/6 (-) |
| Max Power Per Port | 30W; IEEE802.3af/at |
| Total PWR / Input Voltage | 600W (AC100-240V) |
| Power Consumption | Standby<35W, Full Load<600W |
| Power Supply | Built-in power supply, AC 100~240V 50-60Hz 6.6A |
| Physical Parameter |
| Operation TEMP / Humidity | -20~+55°C, 5%~90% RH Non condensing |
| Storage TEMP / Humidity | -40~+75°C, 5%~95% RH Non condensing |
| Dimension (L*W*H) | 440*290*44.5mm |
| Net /Gross Weight | <4.8kg / <5.5kg |
| Installation | Desktop, 19 inch 1U cabinet |
Product Introduction
Full gigabit managed PoE switch has 48*10/100/1000Base-T RJ45 ports
and 4*100/1000Base-X SFP fiber slot ports. Port 1-48 can support
IEEE802.3af/at standard PoE power supply. single port PoE power
reaches 30W. As a PoE power supply device, it can automatically
detect and recognize the power receiving equipment that meets the
standard and supply power through the network cable.
Product Features
Gigabit wire speed access, SFP port uplink
◇ Supports Gigabit Ethernet port and gigabit SFP uplink port
combination, which enables users to flexibly build networking to
meet the needs of various scenarios.
◇ Support non-blocking wire-speed forwarding.
◇ Support full-duplex based on IEEE802.3x and half-duplex based on
backpressure.
Intelligent PoE power supply
◇ 48*10/100/1000Base-T RJ45 ports, meeting the needs of security
monitoring, teleconferencing system, wireless coverage, and other
scenarios.
◇ IEEE802.3af/at PoE standard, without damaging non-PoE devices.
◇ Priority system for PoE port, it will supply power to the high
priority level port first when the power budget is insufficient and
avoid overwork of the device.
◇ PoE network management, realize PoE port power allocation,
priority setting, port power status viewing, time scheduling, etc.
Product picture
Packaging & Shipping
● All of our package are international standard package
● We will deliver our products as soon as the order confirmed
