PE Food Packaging Containers Inspection Equipment with Online
Camera to Take Pictures
| Item | PE Food Packaging Containers Inspection Equipment with Online
Camera to Take Pictures | Main Material | Stainless steel |
| Weight | 500kg | Size | 4250*1650*1860mm |
| Software Algorithm | Deep Learning | Voltage | Ac220/50Hz |
| Current | 4kw-5kw | Air Pressure | 0.5-0.8Mpa |
| Transfer Method | Lossless Delivery | Detection Status | Online Real-Time Detection |
| Detection Method | High-Speed Industrial Camera | Number Of Camera | Depending on the specific situation |
Overviews of inspection
Square bowl is one of the main packages of many fast food brands,
and the appearance quality of the package will attract the
attention of many consumers. Therefore, when the brand side
entrusts the packaging manufacturer to produce, it will gradually
increase the requirements for the manufacturer according to market
feedback. The detection volume of a large number of products is
also gradually increased.
In order to ensure the manufacturer's own production quality and
the reputation of cooperation with the brand, it is an inevitable
choice for manufacturers to change the traditional manual
inspection methods and use high-tech inspection methods. Keye Tech
has mature packaging visual inspection experience. At the same
time, it can use big data information to match industry-accurate
data, check production line problems in a timely manner, improve
efficiency and save costs for enterprises.
Inspection details
Through the docking conveying device (the product needs to be
conveyed out in a straight line with the mouth facing upwards), the
square bowl product is stably and orderly transmitted to a specific
station, and then the high-pixel sample image captured by the
industrial camera is transmitted To the image processing software,
the system analyzes and processes to determine good and bad
products, and controls the corresponding pneumatic components to
eliminate the bad products, and finally collects qualified
products.
The software will open the sample comparison standard, and the
production personnel at the customer site can control the
comparison accuracy and choose the most suitable accuracy standard
for their own production conditions, so as to control the defective
rate.
Application of camera
The solution uses 5 sets of high-resolution industrial cameras and
high-performance strobe light sources to conduct a full range of
visual inspections for the defects inside the square bowl. The
inspection speed is 6600-7200 pieces per hour, and the equipment
can operate 7*24 hours a day. Unqualified products can be
automatically removed online.
The whole set of testing equipment includes mechanical parts,
visual electronic hardware and testing system software. The
entrance and exit of the testing machine can be integrated with the
on-site conveying line (see the design drawing for specific docking
methods), and can be connected upstream and downstream according to
the specific production needs of the customer's site. Production
equipment.
After-sale service
The company has a complete technical service team and rapid
response mechanism, and has dedicated service specialists for each
customer, who can receive technical consultation and fault reports
from customers at any time. And to ensure rapid response to
customer emergencies, to ensure that customers receive satisfactory
service.During the epidemic or due to special reasons, when
after-sales engineers are unable to reach the site, the service
center can remotely adjust customer equipment for troubleshooting
and technical consultation.
After the equipment arrives at the customer site, the after-sales
engineer arrives in time to carry out equipment installation,
commissioning, and operation training. The product quality of the
whole machine is traceable, and the quality warranty period is 1
year from the date of acceptance. In the event of non-human faults
during the warranty period, after-sales engineers will quickly
arrive at the site or provide remote guidance for free maintenance.
