Linear Scale Digital Readout 2/3 Axis DRO Opitical Sensor for
Milling Machine Lathe
SDS6-3V digital readout employs the newest 16 bit SCM technology,
can substitute all kinds of basic function and special required
function of SDS2 series, and all-purpose DRO
The speed of measurement it faster, and the contron system is
easier and smoother.
Each axis can supply 40 point of non-linear compensations.
Improved Functions of SINO Opitical Sensor
- EDM functions: Combine with two kinds of EDM processing function of
common DRO SDS2 and it can be set flexible.
- Lathe's axes-accumulative sampling function: We can choose to
display the accumulative value of the axes Y and Z or the
singleness value of each one(Axes Y, Z are correspond to Z, Z0 of
old model SDS2). During this function. users can separate the data
of axes Y by using relecantly buttons in order to observe the
singlenss date of axes Y. In the separation mode, we can set the
value of axes X, Y and Z, it has complete functions for the lathe
requires three axes.
Specifications of SINO SDS6-3V Digital Readout System
Supply Voltage range: AC 80V~260V; 50~60Hz,US Plug available
Power consumption: 15VA
Operating temperature: 0~45 degrees centigrade
Storage temperature: -30~70 degrees centigrade
Readout allowable input signal: TTL/RS422 square wave
Allowable input signal frequency: Less than 5MHz
Display resolution: 5µm/1µm/0.5µm/0.1µm
Min resolution of digital display angle : 0.0001/pulse
Packaging List :
| 1 PC | 3 Axis LED digital readout SDS6-3V |
| 1 PC | Protection cover |
| 1 PC | Instruction Manual (English) |
| 1 PC | Cable |
Product image /photos:
The rack in the picture is optioned, not standard product.
