| Glass Speed Gate Turnstile <IM.ST603> Product Specifications |
| Product Parameters | Dimensions: | Length 1500*Width 150*Height 1000mm | Box Material | Stainless Steel SUS304 1.5 mm
+ Glass |
| Swing Arm Material: | 10mm Acrylic Swing Door | Channel Width: | Open Type; Recommended ≤1000mm |
| Technical Parameter | ◆Box material: austenitic stainless steel SUS304
◆Power supply voltage: AC1110~220V ± 10V
◆Drive motor: DC brushless motor (24~36VDC)
◆Movement structure: high-precision anti-collision movement,
high-strength clutch, return in case of resistance, high strength,
impact resistance;
◆Service life: more than 8 million times of continuous opening and
closing
◆Infrared sensor: 8 pairs; (support more than 8 pairs of
configuration)
◆Working environment: -35℃～75℃
◆Relative humidity: 0～90% (no condensation)
◆Communication interface: RS485 port
◆The working speed of the turnstile: ≤45 people/min (the memory
mode can be turned on)
◆Passing time: swiping card travel time: 10S (if no one passes 10S:
speed gate turnstile will automatically close, and the time can be
adjusted as needed) |
| Function Parameter | Basic Function | ●Alarm function: with sound and light alarm function |
| ●Anti-interference: It can limit the abnormality of speed gate
turnstile caused by external factors such as electromagnetic |
| ●Pass mode setting: One-way pass, two-way pass, free pass (wing arm
retraction), etc. can be set through the buttons on the main
control board |
| ●Anti-trailing: prevent the non-permissible situation of too many
people at one time. |
| ●Anti-pinch function: When speed gate turnstile is in the process
of closing, speed gate turnstile will stop closing after detecting
the anti-pinch signal |
| ●Auto reset: After speed gate turnstile is opened, if there is no
visitor within the specified time, the system will automatically
cancel the user's access authority; the default is 10 seconds, and
the passage time can be set by the switch |
| ●Access control: The I/O port can connect a variety of biometric
devices |
| ●Power off and open: the gate baffle opens after power off |
| ●Fault detection: The control board can support fault type
detection, assist in analyzing the cause of the fault, and handle
abnormal faults. |
| ●Traffic indication: There is a traffic status indicator; and an
alarm function for exceeding the stay time in the channel can be
set |
| Expanding Function | ▲Passing mode
△Normal: Normal passing mode
△Passing: automatic car/electric car/motorcycle passing mode |
| ▲Sound broadcast, expandable voice module, and volume adjustment |
| ▲Open/close delay, set the delay opening time after speed gate
turnstile receives the opening signal/set the delay closing time
after pedestrians pass, the default is 0 seconds |
▲ Swipe the card in the channel
△ Disabled by default: card swiping in the channel (induction
infrared area) is invalid
△Allow: Card verification is allowed in the channel. |
▲Whether the trailing and reversing are blocked by closing the door
△Do not close speed gate turnstile: the reverse/trailing (A swipe
card, B pass) will not close speed gate turnstile
△Close speed gate turnstile first and then open speed gate
turnstile: close speed gate turnstile first for reverse/trailing
traffic, and then open speed gate turnstile again after closing
△speed gate turnstile will not be opened after speed gate turnstile
is closed: speed gate turnstile will be closed for reverse/trailing
traffic, and speed gate turnstile will not be opened again after
speed gate turnstile is closed |
▲Fire linkage
△Normally open mode: speed gate turnstile remains open
△ Normally closed mode: speed gate turnstile remains closed |
▲Passage Mode
△Bidirectional passage,swiping card bi-directionally for people
flow.
△Bidirectional free passage, no credit card verification is
required.
△Single directional passage, Single directional (A) swiping card,
and the gate opens normally for people flow; reverse directional
(B) swiping card is invalid, and the gate closes.
△Single directional free passage, Single directional (A) free
passage, and reverse directional passing (B) require a swiping card
verification.
△Passing is prohibited, Bidirectional swiping card is invaild, and
the gate enters the locked state. |
|
