Functions & Features
1. Full-automatic type
(1). Stainless steel Housing.
(2). Bi-direction pass.
(3). Arms auto drop when power off.
(4). Arms auto rise up when power on and auto stop on obstacle.
(5). Traffic light indicator.
(6). Wingen 26/Dry contact, is compatible with smart card for
access control.
(7). Photoelectric inspection.
(8). If the passenger does not pass in valid time, the passage will
be locked up. And the valid passing time can be set up by operator.
(9). Passenger counters (optional).
2. Semi-automatic type
(1). Auto-drop-arm function: the middle arm can drop down
automatically (default) (or free passing) when the power is off.
(2). Emergency-escape function: the middle arm will drop down
automatically by pressing the emergency button which can be
remote-controlled whether the power is on or not.
(3). Structure has no motor.
(4). Both directions can be set as controlled mode or free mode.
(5). NO mode & NC mode can be switched over by users easily &
freely.
(6). Self-recovery function: the machine will recovery
automatically with invalid counting if passage is not completed
within pre-set time (5 seconds default, adjustable by software).
(7). With interface of relay switch (the dry contact signal or +12V
electrical level signal or DC12V pulse signal of pulse width ≥
100ms, driving current ≥ 10mA), compatible with all kinds of access
controllers.
(8). Each machine can be set by Physical Address (Optional).
(9). Equipped with free control software for man-machine interface
& control command SDK.
3. Manual Type
(1). Arms can only rotate by single direction, but the direction
can be changed easily inside.
(2). Structure has no electric devices.
Product Description
The equipment runs smoothly, with low noise, high efficiency, space
saving, and can effectively reduce security personnel. It is
suitable for high-end office buildings, airports, subway stations
and other places with high security requirements.
