Product Specifications of Wing Gate Turnstile
Xiongshi<TJ-XYY02> |
Picture of the product | Document Number: | |
| Version | A/0 |
| Revision Time | |
| Revised by | |
|
| Product Parameters | Dimensions | 1500*280*980MM | Housing Material: | Housing:AISI SUS304 1.5MM
Top Cover:AISI SUS304 2.0MM
Column:Corrosion Resistant Electrolytic Plate baking paint 1.5MM |
| Wing Arm material: | Transparent Acrylic；T=15MM | Surface: | Housing:original color hairline Stainless Steel
Verification area module: black plastic parts |
| Product configuration: | Single Channel
Standard:Single core chassis 2 set/turnstile gate 2 set/control
board (master/slave)/Servo movement 2 sets/infrared beams 8
pairs/power supply one set/
optional:Access control system / card swiping module / QR code
module / face recognition equipment |
Product Drawing: |
| Technical Parameter | ◆Housing Material: Housing:AISI SUS304 1.5MM; Top Cover:AISI SUS304
2.0MM; Column:Corrosion Resistant Electrolytic Plate baking paint
1.5MM
◆Service life: 5,000,000 times of continuous opening and closing
◆Input voltage: AC220V±10% ,50Hz～60Hz◆Communication interface:
RS232 serial port
◆Communication protocol: MODBUS protocol
◆Drive motor: DC brushless motor(24~36VDC)
◆Working temperature:-35℃～75℃
◆Relative humidity:0～90%(non-condensing)
◆Turnstile working speed: 30~50 people/min (memory mode can be
turned on)
◆passing time:Swipe the traffic card time:10S(If no one passes
within 10S: the gate closes automatically, and the time can be
adjusted as needed) |
| Function parameter | Basic Function | ●Alarm function: with sound and light alarm function |
| ●Anti-interference:It can limit the abnormality of the gate caused
electromagnetic and other external factors |
| ●Traffic mode setting:One-way traffic, two-way traffic, free
traffic, etc. can be set through the buttons on the main control
panel |
| ●Anti tailing: prevent the unauthorized situation of too many
people at one time. |
| ●Anti pinch function:When the gate is in the process of closing,
the gate will stop closing after detecting the anti-pinch signal |
| ●Automatic reset: after opening the gate, if the user does not pass
within the specified time, the system will automatically cancel the
user's permission to pass this time; The default is 10 seconds, and
the traffic time can be set through the switch |
| ●Access control: External port can connect a variety of biometric
devices |
| ●Power off and opening:switch off after power off, and the switch
opening direction can be set |
| ●Fault detection:Control board can support fault type
detection,Assist in analyzing the causes of faults and handling
faults and abnormalities. |
| ●Passing indication: with passing status indicator; It can also set
the alarm function of exceeding the stay time in the channel |
|
| Extension Function | ▲Voice broadcast, expandable voice module, and volume adjustment |
| ▲Opening / closing delay, set the delay opening time after the gate
turnstile receives the opening signal/set the delay closing time
after pedestrians pass, the default is 0 seconds |
▲Card swiping in the channel
△Default forbidden: card swiping in the channel (inductive infrared
area) is invalid
△Permission:card swiping verification is allowed in the channel |
▲Whether the trailing and reversing are blocked by closing the door
△The gate Closed: the reverse/trailing (A swipe card, B pass) will
not close the gate
△Close the gate first and then open the gate: close the gate first
for reverse/trailing traffic, and then open the gate again after
closing
△Do not open the gate after closing the gate: the reverse/trailing
traffic will close the gate, and the gate will not be opened again
after closing |
▲Fire linkage
△Normally open mode: the gate remains open;
△ Normally closed mode: the gate remains closed |
▲System language function
△Chinese: The system can set the Chinese interface
△English: The system can set the English interface |
▲Passage Mode
△Bidirectional passage,swiping card bi-directionally for people
flow.
△Bidirectional free passage, no credit card verification is
required.
△Unidirectional passage, unidirectional (A) swiping card, and the
gate opens normally for people flow; reverse directional (B)
swiping card is invalid, and the gate closes.
△Unidirectional free passage, unidirectional (A) free passage, and
reverse directional passing (B) require a swiping card
verification.
△Passing is prohibited, Bidirectional swiping card is invaild, and
the gate enters the locked state. |
| |
