| Arc Bevel Swing Gate <TDH-B213> Product Specifications |
| Product Parameters | Dimensions: | 1200*180*980mm | Box Material: | Box: Stainless steel SUS304 foot 1.0mm
Top Cover: stainless steel SUS304 foot 1.2mm |
| Swing Arm Material: | A:Stainless steel SUS304 elbow
B:10MM Acrylic swing door | Channel Width: | Open |
| Technical Parameters | ◆Chassis Material: Austenitic stainless steel SUS304
◆Internal Structure: Steel Frame Construction/Standard Stainless
Steel Housing
◆Work Voltage: AC220V±10V
◆Driving Motor: DC brushless motor(24~36VDC)
◆Movement Structure: Horizontal helical gear anti-collision
movement
◆Normal Work Life: Continuous opening and closing for more than 5
million times
◆Infrared Sensor: 4~6 pairs
◆Working Environment Temperature: -35℃～75℃
◆Relative Humidity: 0～90% (No condensation)
◆Communication Interface: RS232 serial port
◆Communication Protocol: MODBUS protocol
◆Working Speed of the Gate: ≤30 persons/min (The memory mode can be
turned on)
◆Passing Time: passing time by swiping card: 10S (If no one passes
within 10S: the gate will automatically close, and the time can be
adjusted according to needs) |
| Function Parameters | Basic Function | ●Alarm Function: Sound and light alarm function. |
●Anti-interference: To prevent the gate abnormal caused by
electromagnetic and other external causes.
|
| ●Passage Mode Setting: Unidirectional passage, bidirectional
passage and free passage can be set through the main control board
keys. |
| ●Anti-tailgating: To prevent the unpermitted situation of passing
too many people at once. |
| ● Anti-clamp Function: When the brake is in the process of closing,
the brake will stop closing after detecting the anti-clamp signal. |
| ●Self-reset. Pass right will be canceled if people do not go
through within a set time, the default time is 10s, and the passage
time can be set by switch. |
| ●Access Control: The external port can be connected to a variety of
biometric identification devices. |
| ● The gate opens after power failure. |
| ●Fault Detection: The control board can support fault type
detection, fault cause analysis, and fault troubleshooting. |
| ●Passing Indicator: Traffic status indicator light; the alarm
function of overstay time in the channel can be set. |
|
| Extensible Functions | ▲Passing Mode
△Normal: Normal passing mode.
△Passing: automatic car/electric car/motorcycle passing mode. |
| ▲Voice broadcast, expandable voice module,and volume adjustment. |
| ▲Switch on/Switch off Delay: set the delay of switch off after the
switch machine receives the switch off signal/set the delay of
switch off after the pedestrian passes. The default value is 0
seconds. |
▲Swipe Card in the Channel
△Default Disable: Card swiping in the channel (in the inductive
infrared region) is invalid
△Allow: Swipe card verification is allowed in the channel. |
▲ Whether the Trailing and Reversing are Blocked by Closing the
Door
△Not close: Reverse passage /tailgating (A swips the card, B
passes) will not close the gate.
△Close the gate and then open the gate: Reverse/trailing passage
will close the gate first, and open the gate again after closing.
△Not open after closing: reverse/trailing passage will close the
gate, and will not open again after closing the gate. |
▲Fire Linkage
△Normally open mode: the gate maintains the open state;
△ Normally closed mode: the gate maintains the switch state. |
▲Passage Mode
△Bidirectional passage,swiping card bi-directionally for people
flow.
△Bidirectional free passage, no credit card verification is
required.
△Unidirectional passage, unidirectional (A) swiping card, and the
gate opens normally for people flow; reverse directional (B)
swiping card is invalid, and the gate closes.
△Unidirectional free passage, unidirectional (A) free passage, and
reverse directional passing (B) require a swiping card
verification.
△Passing is prohibited, Bidirectional swiping card is invaild, and
the gate enters the locked state. |
|
