ASTM D5001 Ball-On-Cylinder Lubricity Evaluator ( BOCLE ) Test Equipment

Product Introduction:
Determination of the wear behavior of aviation turbine fuels on the boundary lubricity of friction steel surfaces. Test principle: Put the test sample into the test oil pool, keep the relative humidity of the air in the pool at 10%, and fix a non-rotatable steel ball in a vertically installed chuck so that it is facing an axially installed steel ball. ring, and add the load. The test cylinder is partially submerged in the oil bath and rotated at a fixed speed. This maintains the cylinder in wet conditions and continuously delivers the sample to the ball/ring interface. The diameter of the wear scar produced on the test ball is a measure of the lubricity of the specimen.

Main features:

1.Control, color liquid crystal display, can operate intuitively and display the whole process of the test;

2.Easy to use interface: digital computer controls all instrument functions

3.Standard ASTM D 5001 test procedures are pre-loaded into the ABT microprocessor controller: the operator installs the cleaned test piece, adds the fuel sample and presses the "Start Test" button

4.Automatically control the test sequence: the measurement process does not require operator intervention

5.Automatic flow controller to control humid and dry air: No operator control is required to regulate the humidity and flow of air

6.Interchangeable humidity and temperature probes: Humidity and temperature measurements do not require recalibration, just replace the combined relative humidity and temperature probe with an exchange pre-calibrated unit

7.Heating and cooling system: Peltier heating and cooling system

8.Digital microscope equipped with image acquisition system and software

9.All parameters: motor speed, test time, fuel temperature, air temperature, humidity data, etc. are directly displayed

10.Ultrasonic cleaning

Technical Parameters

Factory overview

Customer Feedback

Transporation

FAQ

1.What's the delivery time?
About 2 months.

2.What's your payment terms?
30% paid by T/T in advance,70% paid by by T/T before shipping.

3.What's your guarantee terms?
The warranty of all products is 1 year.During this period,we are responsible for all faults caused by us.And we can supply life-long technical support.

4.Can you supply training?
We can supply training in our factory and online training for free.If onsite installation and training are required,please pay for tickets,accommodation and salary USD150/Day for every person.