SINO Digital Readout DRO, 3 Axis 1um Glass Linear Scale Meter for
Milling Lathe
SINO 3 Axis LED Digital Readout System DRO SDS6-3V
The SDS6-3V offers a high performance universal display console
with Milling, Lathe and Grinding functions.
SDS6 Digital Readout employs the newest16 bit SCM technology, can
substitute all kinds of basic function and special required
function of SDS2 Series, an all-purpose DRO.
The speed of measurement is faster, and the control system is
easier and smoother.Each axis can supply 40 points of non-linear
compensations.
Improved Functions of Sino Digital readout DRO
- Enlarge the calculator function:
Not only add the calculator function into the program of EDM,
lathe, milling machines of the DRO, but also have the choice to
select the number of digits behind the radix point, like 3, 4 or 5
digits to enhance the calculating phance the calculating precesion.
- Non-linear error compensation:
The system has maximum 40 sections non-linear error compensation to
improve the machining precision.
3. In inch display mode, the numbers of decimal digits can be
chosen:
The numbers of decimal digits can be chosen as four or five. Four
digits can satisfy the long scales' requirement, and five digits
can be for the high precision requirements. Please review the
manual for the detail about differences.
Specifications :
Supply Voltage range: AC 80V~260V; 50~60Hz,US Plug available
Power consumption: 15VA
Operating temperature: 0~45 degrees centigrade
Storage temperature: -30~70 degrees centigrade
Readout allowable input signal: TTL/RS422 square wave
Allowable input signal frequency: Less than 5MHz
Display resolution: 5µm/1µm/0.5µm/0.1µm
Min resolution of digital display angle : 0.0001/pulse
Packaging List :
| 1 PC | 3 Axis LED digital readout SDS6-3V |
| 1 PC | Protection cover |
| 1 PC | Instruction Manual (English) |
| 1 PC | Cable |
Product image /photos:
The rack in the picture is optioned, not standard product.
