Single-Turn
Cermet
Sealed
Industrial
Miniature package
Tape and reel packaging available
RoHS Compliant
What is Trimmer Potentiometer
Trimmer potentiometer is a resistance that can be adjusted or
"trimmed" to a precise resistance through screw adjust. This type
of resistor is often used in circuits because it allows adjustment
of circuit performance. Use a tool (for example a screwdriver) to
turn the dial or knob on the device to adjust. Trimmer
potentiometers symbols are shown below.
Product Characters
| 1.Physical Characteristics | |
| Mechanical Angle | 270 ° nom. |
| Terminals | Solderable pins |
| Torque | 3.0 oz-in (3.3 g.cm) max. |
| Stop Strength | 7.0 oz-in (7.88 g.cm ) min. |
| 2.Electrical Characteristics |
| Adjustability Voltage divider | ±0.05% |
| Total resistance (standard resistance range) | 100Ω-3MΩ |
| Total resistance tolerance | ±10% |
| Residual resistance(Absolute minimum resistance) | 1% or 2ohms |
| Insulation resistance | 500vdc. 1000mΩ min. |
| Rheostat | ±0.15% |
| Dielectric Strength | 80,000 feet:350 vac;Sea Level:900 vac, |
| 3.EnvironmentalCharacteristics |
| Adjustment Angle | 240o |
| Power Rating (300 volts max.) | 70oC:0.5W,125oC:0W |
| Temperature range | -55oC to +125oC |
| Temperature Coefficient | ±100 ppm/°C |
| Load Life | 1,000 hours 0.5W@ 70 °C (3 % ΔTR; 3 % or 3 ohms,whichever is
greater, CRV) |
| Rotational Life | 200 cycles (4 % ΔTR; 3 % or 3 ohms,whichever is greater, CRV) |
Our Advantage
1.Design and prototype and automation basis in Dongguan which is the manufacturing center of
South China.
2.10+ dedicated and experienced engineers in R&D department.
3.Manufacture Center in Sichuan Province which is located Yangzi
River wharf and Chongqing Airport .
4.10+ production lines, 100+ experienced workers.
5.Help customers quickly transfer their ideas into mass production
solutions, and complete prototype design, development and
verification.
