Slide potentiometers (pot) uses a resistance element and slide
contacts to form an adjustable voltage divider. If only two
terminals, one end of the element and adjustable contacts are used,
it acts as a variable resistor or rheostat.
Product features
- Seal type
- RoHS compliant
- Small volume
- Structural diversification
- High Quality
Product Specification
| 1.Mechanical Characteristics |
| Lever stop strength | 6Kgf.cm Min |
| Operating force | 5-35gf.cm |
| Lever wobble | 2(2xL/25)mm P-P Max. |
| Lever travel | 100±1mm |
| Slide trust of the Lever | 5Kgf 10s Min |
| Life Cycle | 30,000 cycles |
| 2.Electrical Characteristics |
| Total resistance | 5KΩ-500KΩ |
| Total resistance tolerance | ±10% or ±20% |
| Residual resistance | 50Ω Max |
| Max. operating voltage | 50V AC, 20V DC |
| Dielctrical Strength | 250V DC for １minute |
| Rated Power | 0.05W for linear taper, 0.025W for audio taper |
| Insulation resistance | 100MΩ min．(DC 500V) |
| Noise | 47 mV max |
| 3.Environmental Performance |
| Operating temperature range | -10oC to +70oC |
| Storage temperature range | -30oC to +70oC |
| 4.Welding Performance |
| Reference for hand soldering | 235℃ 5sec. |
Our Advantage
1. More than 10 years of experience in research and development
production design.
2. 9 automation production lines, more than 100 experienced workers
for higher precision products.
3. 10+ dedicated and experienced engineers and designers in R&D
department.
4. Support ODM/OEM customized service. Help customers quickly
design their ideas into mass production solutions, and complete
prototype design, development and verification.
5. Professional Testing instruments and team to ensure product
quality.
