TI-OR12 Common Mode Choke Inductor Customizated 10mm Toroidal
Magnetic Coil
What is an inductor
The inductor consists of a coil of conducting material- insulated
copper wrapped around a core of a ferrimagnetic material which is
called an "iron core" inductor.
An inductor is characterized by its inductance, which is the ratio
of voltage to the rate of change of current.
Charactor of Inductor’s
The flow of current produces a magnetic field, and the change in
the magnetic field produces the opposite current.
Convert electrical energy into magnetic energy and store it.
Direct current can pass through, but alternating current does not
pass easily at higher frequencies.
Product Features:
1.The inductance and wire spec can be customermized
2.Magnetic Coil:10mm
3.Stable thermal capability.
4.Low magnetic leakage.
5.High operation frequency.
6.Low DC resistance & Low loss.
7.High saturation materal & high efficiency.
8.Excellent current choking performance.
9.Complaint to RoHS Directive
Application of inductors
Inductors' applications range from the use of large inductors in
power supplies, which along with filter capacitors remove multiples
of the mains frequency of the DC output , to small inductors of
ferrite beads or toris installed around the cable to prevent radio
frequency interference in transmission along the wire.In many
switching power supplies, the inductor works as energy storage
device to produce DC current. The inductor powers the circuit,
keeps the current flowing during the "off" switch, and makes
possible a topology in which the output voltage is higher than the
input voltage.
