RV24YNME20SB103 Rotary Potentiometer With Rotary Switch For
Mechanical And Medical Equipment
Description of Rotary Potentiometer
The rotating potentiometer is an adjustable electrical resistor,
which slides on the resistors by the wiper, and obtains the output
voltage associated with the input voltage in the circuit.
Features of Rotary Potentiometer
Good sealing performance
Using plastic sealing structure, can effectively deal with wave
welding.
Push-pull switch or rotating switch can be chosen.
Can be with positioning.
Shaft length and shape can be adjusted.
A variety of mounting methods for choice.
Specification of Rotary Potentiometer
| 1.Electrical Characteristics |
| Total resistance | 1KΩ-2MΩ |
| Total resistance tolerance | ±10% |
| Residual resistance | 3Ω Max |
| Rated Power | At 40℃: B :0.4W ／ R ≦ 1kΩ , 0.3W ／ 1kΩ <R ≦ 10kΩ , 0.25W ／ 10kΩ
<R |
| A, C :0.2W ／ R ≦ 1kΩ , 0.2W ／ 1kΩ <R ≦ 10kΩ , 0.15W ／ 10kΩ <R |
| At 85℃ : OW |
| Insulation resistance | 100MΩ min．(DC 1,000V) |
| Dielctrical proof | AC 1,000V １minute |
| Electrical angle | 280 ± 10° |
| 2.Mechanical Characteristics |
| Rotation stopper strength | 900N・m min．(9.18kgf・cm min.) |
| Total rotation angle | 300o±5o |
| Totational torque | 5 ～ 30mN・m (51 to 306gf・cm) |
| Key push-pull strength | Min:8Kgf |
| Terminal Strength | 5N for 1 minute |
| 3.Environmental Performance |
| Operating temperature range | -10oC to +85oC |
| 4.Welding Performance |
| Reference for hand soldering | 235℃ 5sec. |
| 5.Switch Performance |
| Contact resistance | 0.05ΩMax. |
| Operating torque | 150mN.m Max( 1530gf.m Max) |
| Operating Life | Without Load 1000 cycles |
Our Advantage
1. More than 10 years of experience in research and development
production design.
2. 4 automation production lines, more than 100 experienced workers
for higher precision products.
3. 10+ dedicated and experienced engineers and designers in R&D
department.
4. Support ODM/OEM customized service. Help customers quickly
design their ideas into mass production solutions, and complete
prototype design, development and verification.
5. Professional Testing instruments and team to ensure product
quality.
