Automatic Steel Single Shaft Brick Extruder Machine For Brick Plant
1, Product features:.
Double shaft mixer uses two symmetrical spiral axis of the
synchronous rotation, while conveying dry powder and other powdery
material while adding water and stirring, uniform humidification of
dry powdery material, so that the humidification material does not
take dry ash will not seepage The purpose of water droplets, so as
to facilitate wet loading and transportation of ash loading or
transfer to other conveying equipment. Mainly used in thermal power
plants, brick, mining and other industries fly ash or similar
materials wet loadinions.
2, Technical parameters
| Date | Units of meas | SJ400*50 |
| Production capacity | M3/h | 60-100 |
| Agitator shaft speed | r/min | 38 |
| Power | kw | 110 |
| Overall dimension | mm | 7800×1650×1100 |
| Mixing diameter | mm | 550 |
3. Characteristics
Double shaft mixer uses two symmetrical spiral axis of the
synchronous rotation, while conveying dry powder and other powdery
material while adding water and stirring, even humidification of
dry powdery material, so that the humidification material does not
take dry ash will not seepage Water droplets, so as to facilitate
the loading and unloading of humidified ash and other conveying
equipment, and is mainly applicable to the occasions where the wet
loading of fly ash or the like in thermal power plants, mines and
the like is carried out.
4. Equipment Structure Characteristics
Double shaft mixer mainly by the shell, screw shaft assembly,
drive, piping, cover, chain cover and other components (see random
external map), the specific structural performance characteristics
are as follows:
1 Shell is mainly composed of plate and steel, welded in the
factory forming, and assembled with other components, is the
biaxial mixer support. Shell sealed tightly, there will be no fly
ash, Yang, the phenomenon of leakage.
2. Screw shaft assembly is the main component of the biaxial mixer,
its components are mainly about the screw shaft, bearing housing,
bearing housing, bearing cover, gear, sprocket, oil cup, blades and
other components.
Screw to the left and right axis to produce high precision
requirements, process performance, and the bearing seat, bearing
sleeve, bearing cap with strict requirements. The gear module is 8,
the number of teeth is 60, the tooth profile angle is 20 °, the
sprocket pitch is 50.8, the number of teeth is 25 and the profile
is GB1224-85. Gears, sprockets have protective cover protection,
safe and effective operation. Oil cup press-fit pressure cup,
filling lubricant convenient and effective. Biaxial mixer blade
material selection of wear-resistant and difficult to stick gray
composite ceramic. Blade structure design is reasonable and easy,
easy to change after wearing, long service life.
3. Water conditioning pipe mainly by the takeover, fittings and
nozzles. Nozzle spray nozzle stainless steel cone, arranged in the
mixer above the internal shell, along the axial direction of the
spiral axis arranged to form a curtain to facilitate humidification
mixing materials. Nozzle structure is simple, easy to replace,
stainless steel, corrosion-resistant durable. Moisture content can
be adjusted by operating the manual control valve on the supply
line.
4. Cover mainly include left cover, middle cover, right cover, hole
cover and access hole cover. Biaxial mixer on both sides of the set
six manholes, to facilitate the operator's normal maintenance and
repair. Biaxial mixer for pneumatic conveying end,
4.Machine pics
